Meeting the requirements
Joysticks are sophisticated components in the man-machine interface.
At Danfoss, we develop and update our range continuously to meet the growing functional and safety requirements of today’s mobile machines.
From time to time, this means phasing out older products to make way for the newest technology and ergonomic designs.
To support customers during the phasing-out period, we continue to supply these joysticks as legacy products.
The following legacy joysticks are currently available:
- Contactless hall effect or long-life potentiometric sensing
- Redundant sensors
- Single or dual axis
- Outputs
- Analog
- CAN(J1939, CANopen)
- CAN+(J1939)
- PWM(High Current)
- Up to IP66/67 environmental sealing above panel & IP66 below panel
- Grip options
- A-grip
- MG grip
Downloads
- Rugged design
- >15 million cycle operating life
- Ergonomic left hand and right hand grip
- Non-contact, redundant hall effect sensors on X and Y axis
- Up to 7 push-button switches plus a trigger switch
- Serviceable for reduced downtime
- ±20° travel or ±25°
- Outputs
- CAN (J1939, CAN open) with separate Analog
- Analog
Downloads
- Ergonomic ProGrip
- Direct control of PVE-based valves
- Built-in switch for external equipment
- Up to 8 on/off functions
Downloads
- One or two potentiometer sensors
- Single axis
- Shaft movement options
- Spring return, and with one spring force
- Friction hold with adjustment
- Environmental protection
- Tested to NEMA 4 (IP 65)
- Electrical connection
- Terminal strip (standard configuration)
- Wiring harness (pigtail) with optional connector
- Grip options
- Ball
- Center lock
- Push-button
- Rocker switch
- IP 65 environmental sealing above panel
- Built-in switch for external equipment
- Direct control of PVE-based valves
Downloads
- Fingertip control
- Small dimensions
- Low weight
- Built-in flow regulation
Downloads
- IP 54 environmental sealing above panel
- Direct control of PVE-based valves
- IP 54 environmental sealing above panel
- Direct control of PVE-based valves
- Single or dual axis
- On/off rocker switch
- Up to 3 proportional outputs
- Long life potentiometric sensing
- Independent direction switch signals
- Single axis
- IP 66 environmental sealing above panel
Downloads
- Contactless hall effect sensing
- Redundant sensors
- Single and dual axis
- IP 65 environmental sealing above panel
- Multiple grip options, including Z-axis twist
Downloads
Related products
-
JS1-HThe JS1-H family is suitable for almost any machine that requires joystick control. PLUS+1® compliance enables simple and seamless future-oriented integration in the machine control system.
-
JS1000
JS1000 is a joystick with a single- and dual-axis configurations and contact hall effect sensing.
-
Unidirectional foot pedal
Rugged design uni-directional pedals with 3 million cycle operating life.
-
Bidirectional foot pedal
Rugged design bi-directional pedals with 3 million cycle operating life.
-
PLUS+1® MC microcontrollers
Our powerful PLUS+1® microcontrollers bring intelligence to every node of a distributed control system. And they are equally effective for stand-alone control in smaller machines.
Related applications
-
Agriculture
Farmers need agricultural machines that deliver the same high productivity every season. Hydraulic solutions from Danfoss ensure world-class performance from each machine, and a comfortable, stress-free working environment for their operators.
-
Construction
Space is limited on construction sites, and there are people working everywhere. Contractors need machines that can safely maneuver in a tight spot. At the same time they still need to be powerful enough to get the job done. At Danfoss, we deliver the components, software, and controls that enable your machines to run safely, efficiently and effectively.
-
Crane and material handling
Cranes and other large handling machines are required to operate within very specific load ranges. Danfoss provides pressure transmitters that supply load limiting systems with crucial data, safeguarding your equipment, your load, and your operator.
-
Forestry
Rough, sloping terrain and cramped working conditions call for robust and reliable forestry machines. We make sure you can manage everything from cutting trees and transport to preparing the forest floor for replanting. We have the smart hydraulic solutions your machines need for precise and efficient forestry operations.
-
Heavy machinery
Think about the heaviest challenges in the open mining, road building and construction industry. Tasks such as cutting through rock or the Arctic permafrost; compacting thick layers of hot asphalt. As well as lifting huge, prefabricated wall panels into place.
-
Lawn and turf
Lawn and turf machines must adapt to their surroundings and the season – becoming sweepers or snow blowers as required. At Danfoss, we make hydraulic solutions to provide that flexibility and ensure safe and efficient operation.
Related solutions
-
Propel
We can partner with you to design and implement hydrostatic drive solutions. That provide operators with machines that are easier to maneuver. We are committed to helping you provide a more profitable investment for your customers.
-
Steering
As the global market leader in steering components and systems, Danfoss equips everything from small lawn machines to the largest dump trucks.
-
Total machine management
Our PLUS+1® platform delivers the software application development power you need — and doesn’t require specialized programming skills.
-
Work functions
Our total systems approach integrates advanced Danfoss hardware and software to deliver exceptional work function control.
