Get even more drive in your HVAC – with rock-bottom lifecycle costs in any climate
Get even higher reliability and lower total cost of ownership (TCO) in your heating, ventilation and air-conditioning (HVAC) installations, with this unique VSD optimized for building automation systems.
More than ever, the extreme climates, inaccessible machine rooms and isolated outposts of our planet need the best process control there is for their HVAC installations. Your everyday critical functions and costly systems need it too, as they face ever-increasing competition and efficiency demands. Always with high performance in mind, the enhanced VLT® HVAC Drive gives you more room to maneuver. It confronts the issues and gives you rock-solid reliability. With rock-bottom lifecycle costs too.
Supply voltages and power range
- 3 x 200-240 V...1.1-45 kW
- 3 x 380-480 V...1.1-1000 kW
- 3 x 525-600 V...1.1-90 kW
- 3 x 525-690 V...1.1-1400 kW
Low harmonic drive
- 3 x 380-480 V...160-710 kW
12-pulse drive
- 3 x 380-500 V...250 kW – 1 MW
- 3 x 525-690 V...250 kW – 1.4 MW
Features and benefits
Slim down your TCO. Ongoing demands for lower TCO are challenges the VLT® HVAC Drive can help you meet.
Install it outdoors in extreme climates. Searing heat and deep frost are all in a day’s work for the enhanced VLT® HVAC Drive. You get full reliability running this drive outdoors with temperature extremes from +50°C to -25°C.
Save time. You can parameterize and troubleshoot the drive from outside the AHU, thanks to the wireless LCP. Maximize uptime by reducing the shutdown, since there is no need to open up the AHU and lock it down again afterwards.
Get the freedom to choose your favorite motor. Choose exactly the motor you prefer, for whatever reason from supply security to performance optimization. The enhanced VLT® HVAC Drive is not only optimized to control induction, permanent magnet and synchronous reluctance motor technologies; our development team is working all the time to include compatibility with upcoming motor technologies in future software updates as well.
Get the freedom to communicate. The ability to integrate the AC drive easily into your building automation system is a key to optimal control. The VLT® HVAC Drive features a number of HVAC-specific communication protocols, such as BACnet/IP, that give you flexibility of installation in both new and existing building automation systems.
Maximize uptime by monitoring system health. Integrated condition-based monitoring works with sensors including the VLT® Pressure Transmitter PTU 025 to detect system changes early

This Carlsberg brewery drives down energy consumption by 50% in its ventilation systems.

The high-efficiency EC+ concept saved 43% energy at Keppel Bay Tower in Singapore.
Documents
Type | Name | Language | Valid for | Updated | Download | File type |
---|---|---|---|---|---|---|
Operating guide | VLT HVAC Drive FC 102 110-800kW Op.Guide | English | Multiple | 01 Feb, 2022 | 23.0 MB | |
Programming guide | VLT® HVAC Drive FC 102 | English | Multiple | 01 Oct, 2019 | 5.7 MB | |
Design guide | VLT® HVAC Drive FC 102 1.1-90 kW | English | Multiple | 13 Jun, 2014 | 6.3 MB | |
Operating guide | VLT® HVAC Drive FC 102 110-400kW D-frame | English | Multiple | 01 Jan, 2022 | 13.0 MB | |
Design guide | VLT® HVAC Drive FC 102 355-1400 kW | English | Multiple | 01 Nov, 2017 | 7.7 MB | |
Design guide | VLT® HVAC Drive FC 102, 110–800 kW, D&E | English | Multiple | 01 Jan, 2018 | 14.3 MB | |
Operating guide | VLT® HVAC Drive FC 102, 355-800 kW, Encl | English | Multiple | 01 Feb, 2022 | 19.3 MB | |
Brochure | VLT® HVAC Drive FC102 SG | English | Multiple | 01 Nov, 2020 | 10.7 MB |
Drawings
Can't find the 3D model or drawing you're looking for? Sort and filter the following table by using the icons at the top of the columns.
Type | Name | Language | Updated | Download | File type |
---|---|---|---|---|---|
EPLAN-files | FC-102N110T4E54H4XGCXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 859.0 KB | ZIP | |
EPLAN-files | FC-102N160T4E5MN4TGC7XXSXXXXAXBKCXXXXD0 | 01 Feb, 2019 | 6.8 MB | ZIP | |
EPLAN-files | FC-102N200T4E5MN4TGC7XXSXXXXAXBKCXXXXD0 | 01 Feb, 2019 | 5.8 MB | ZIP | |
EPLAN-files | FC-102N250T4E21H4XGCXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 980.1 KB | ZIP | |
EPLAN-files | FC-102N315T4H54H4XGC3XXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 881.9 KB | ZIP | |
EPLAN-files | FC-102N560T4E54H4TGC3XXSXXXXA0B4CXXXXD0 | 01 Feb, 2019 | 1.7 MB | ZIP | |
EPLAN-files | FC-102P11KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 1.8 MB | ZIP | |
EPLAN-files | FC-102P11KT4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 Jun, 2020 | 1.0 MB | ZIP | |
EPLAN-files | FC-102P15KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 1.8 MB | ZIP | |
EPLAN-files | FC-102P15KT4E21H1TGCXXXSXXXXALBXCXXXXD0 | 01 Mar, 2022 | 1.3 MB | ZIP | |
EPLAN-files | FC-102P15KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 2.4 MB | ZIP | |
EPLAN-files | FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 1.8 MB | ZIP | |
EPLAN-files | FC-102P18KT4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 Apr, 2020 | 1.0 MB | ZIP | |
EPLAN-files | FC-102P1M2T7E21H2XGCXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 2.2 MB | ZIP | |
EPLAN-files | FC-102P22KT4E21H1TGCXXXSXXXXALBXCXXXXD0 | 01 Mar, 2022 | 954.2 KB | ZIP | |
EPLAN-files | FC-102P22KT4E21H1XGXXXXSXXXXAXBKCXXXXDX | 01 Mar, 2022 | 953.8 KB | ZIP | |
EPLAN-files | FC-102P22KT4E21H1XGXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 897.8 KB | ZIP | |
EPLAN-files | FC-102P22KT4E66H3XGXXXXSXXXXAXBXCXXXXDX | 07 Dec, 2022 | 2.0 MB | ZIP | |
EPLAN-files | FC-102P2K2T4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 Jun, 2020 | 724.0 KB | ZIP | |
EPLAN-files | FC-102P30KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 2.6 MB | ZIP | |
EPLAN-files | FC-102P30KT4E21H1XGX1XXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 721.6 KB | ZIP | |
EPLAN-files | FC-102P30KT4E55H1XGX1XXSXXXXAXBXCXXXXDX | 01 Mar, 2019 | 717.9 KB | ZIP | |
EPLAN-files | FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 1.9 MB | ZIP | |
EPLAN-files | FC-102P37KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 1.5 MB | ZIP | |
EPLAN-files | FC-102P3K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 Apr, 2020 | 1.1 MB | ZIP | |
EPLAN-files | FC-102P45KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 2.1 MB | ZIP | |
EPLAN-files | FC-102P4K0T4Z55H1XGXXOXSXXXXAXBXCXXXXDX | 01 Apr, 2020 | 1.5 MB | ZIP | |
EPLAN-files | FC-102P55KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 1.6 MB | ZIP | |
EPLAN-files | FC-102P560T4E54H2TGC7XKSXXXXA0B4CXXXXD0 | 01 Feb, 2019 | 2.5 MB | ZIP | |
EPLAN-files | FC-102P5K5T4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 Apr, 2020 | 620.8 KB | ZIP | |
EPLAN-files | FC-102P75KT4E20H2XGCXXXSXXXXAXBXCXXXXDX | 30 Nov, 2020 | 1.6 MB | ZIP | |
EPLAN-files | FC-102P75KT4E55H2XGXXXXSXXXXAXBXCXXXXDX | 01 Feb, 2019 | 1.5 MB | ZIP | |
EPLAN-files | FC-102P7K5T4E20H1XNXXXXSXXXXAXBXCXXXXDX | 01 Mar, 2022 | 611.4 KB | ZIP | |
EPLAN-files | FC-102P7K5T4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 Apr, 2020 | 676.9 KB | ZIP | |
EPLAN-files | FC-102P90KT4E55H2TGXXXXSXXXXA0B0CXXXXD0 | 01 Feb, 2019 | 1.6 MB | ZIP | |
EPLAN-files | MCA 104 | 01 Mar, 2019 | 1.2 MB | ZIP | |
EPLAN-files | MCA 104 coated | 01 Mar, 2019 | 1.2 MB | ZIP | |
EPLAN-files | MCA 108 | 01 Mar, 2019 | 1.3 MB | ZIP | |
EPLAN-files | MCA 108 coated | 01 Mar, 2019 | 1.3 MB | ZIP | |
EPLAN-files | MCA 109 | 01 Mar, 2019 | 1.1 MB | ZIP | |
EPLAN-files | MCA 109 coated | 01 Mar, 2019 | 1.1 MB | ZIP | |
EPLAN-files | MCA 121 | 01 Mar, 2019 | 1.6 MB | ZIP | |
EPLAN-files | MCA 121 coated | 01 Mar, 2019 | 1.6 MB | ZIP | |
EPLAN-files | MCA 122 | 01 Mar, 2019 | 1.3 MB | ZIP | |
EPLAN-files | MCA 122 coated | 01 Mar, 2019 | 1.3 MB | ZIP | |
EPLAN-files | MCA 125 | 01 Mar, 2019 | 1.2 MB | ZIP | |
BIM-files | MCAD FC 102 A2 IP20 1.1-4kW | 01 Sep, 2018 | 2.8 MB | ZIP | |
BIM-files | MCAD FC 102 A2 IP20 AB 1.1-4kW | 01 Sep, 2018 | 2.8 MB | ZIP | |
BIM-files | MCAD FC 102 A2 IP20 ABC 1.1-4kW | 01 Sep, 2018 | 2.8 MB | ZIP | |
BIM-files | MCAD FC 102 A2 IP21 1.1-4kW | 01 Sep, 2018 | 2.8 MB | ZIP | |
BIM-files | MCAD FC 102 A2 IP21 AB-1.1-4kW | 01 Sep, 2018 | 2.8 MB | ZIP | |
BIM-files | MCAD FC 102 A3 IP20 1.1-7.5kW | 01 Sep, 2018 | 5.9 MB | ZIP | |
BIM-files | MCAD FC 102 A3 IP20 AB 1.1-7.5kW | 01 Sep, 2018 | 5.9 MB | ZIP | |
BIM-files | MCAD FC 102 A3 IP20 ABC 1.1-7.5kW | 01 Sep, 2018 | 5.9 MB | ZIP | |
BIM-files | MCAD FC 102 A3 IP21 1.1-7.5kW | 01 Sep, 2018 | 5.9 MB | ZIP | |
BIM-files | MCAD FC 102 A3 IP21 AB 1.1-7.5kW | 01 Sep, 2018 | 5.9 MB | ZIP | |
BIM-files | MCAD FC 102 A4 IP55 1.1-4kW | 01 Sep, 2018 | 2.7 MB | ZIP | |
BIM-files | MCAD FC 102 A4 IP66 1.1-4kW | 01 Sep, 2018 | 2.7 MB | ZIP | |
BIM-files | MCAD FC 102 A5 IP55 1.1-7.5kW | 01 Sep, 2018 | 8.0 MB | ZIP | |
BIM-files | MCAD FC 102 A5 IP66 1.1-7.5kW | 01 Sep, 2018 | 8.0 MB | ZIP | |
BIM-files | MCAD FC 102 B1 IP21 5.5-18kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 B1 IP55 5.5-18kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 B1 IP66 5.5-18kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 B2 IP21 11-30kW | 01 Sep, 2018 | 3.2 MB | ZIP | |
BIM-files | MCAD FC 102 B2 IP55 11-30kW | 01 Sep, 2018 | 3.2 MB | ZIP | |
BIM-files | MCAD FC 102 B2 IP66 15-30kW | 01 Sep, 2018 | 1.7 MB | ZIP | |
BIM-files | MCAD FC 102 B3 IP20 5.5-18kW | 01 Sep, 2018 | 3.1 MB | ZIP | |
BIM-files | MCAD FC 102 B3 IP20 AB 5.5-18kW | 01 Sep, 2018 | 3.1 MB | ZIP | |
BIM-files | MCAD FC 102 B3 IP20 ABC 5.5-18kW | 01 Sep, 2018 | 3.1 MB | ZIP | |
BIM-files | MCAD FC 102 B3 IP21 5.5-18kW | 01 Sep, 2018 | 3.1 MB | ZIP | |
BIM-files | MCAD FC 102 B3 IP21 AB 5.5-18kW | 01 Sep, 2018 | 3.1 MB | ZIP | |
BIM-files | MCAD FC 102 B4 IP20 11-37kW | 01 Sep, 2018 | 4.6 MB | ZIP | |
BIM-files | MCAD FC 102 B4 IP21 11-37kW | 01 Sep, 2018 | 4.6 MB | ZIP | |
BIM-files | MCAD FC 102 C1 IP21 18-55kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 C1 IP55 18-55kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 C1 IP66 18-55kW | 01 Sep, 2018 | 2.9 MB | ZIP | |
BIM-files | MCAD FC 102 C2 IP21 37-90kW | 01 Sep, 2018 | 3.5 MB | ZIP | |
BIM-files | MCAD FC 102 C2 IP55 37-90kW | 01 Sep, 2018 | 3.5 MB | ZIP | |
BIM-files | MCAD FC 102 C2 IP66 37-90kW | 01 Sep, 2018 | 2.0 MB | ZIP | |
BIM-files | MCAD FC 102 C3 IP20 22-55kW | 01 Sep, 2018 | 2.7 MB | ZIP | |
BIM-files | MCAD FC 102 C3 IP21 22-55kW | 01 Sep, 2018 | 2.7 MB | ZIP | |
BIM-files | MCAD FC 102 C4 IP20 37-90kW | 01 Sep, 2018 | 2.1 MB | ZIP | |
BIM-files | MCAD FC 102 C4 IP21 37-90kW | 01 Sep, 2018 | 2.1 MB | ZIP | |
M-Drawing | MCAD FC A2 IP20 A | 01 Oct, 2016 | 7.2 MB | DXF | |
M-Drawing | MCAD FC A2 IP20 A | 01 Oct, 2016 | 1.9 MB | ||
M-Drawing | MCAD FC A2 IP20 A | 01 Oct, 2016 | 2.2 MB | JPG | |
M-Drawing | MCAD FC A2 IP20 A | 01 Oct, 2016 | 8.6 MB | STP | |
M-Drawing | MCAD FC A2 IP20 AC | 01 Oct, 2016 | 7.8 MB | DXF | |
M-Drawing | MCAD FC A2 IP20 AC | 01 Oct, 2016 | 2.0 MB | ||
M-Drawing | MCAD FC A2 IP20 AC | 01 Oct, 2016 | 9.4 MB | STP | |
M-Drawing | MCAD FC A2 IP20 AC | 01 Oct, 2016 | 2.3 MB | JPG | |
M-Drawing | MCAD FC A3 IP20 A | 01 Oct, 2016 | 10.4 MB | STP | |
M-Drawing | MCAD FC A3 IP20 A | 01 Oct, 2016 | 2.3 MB | JPG | |
M-Drawing | MCAD FC A3 IP20 A | 01 Oct, 2016 | 3.7 MB | DXF | |
M-Drawing | MCAD FC A3 IP20 A | 01 Oct, 2016 | 1.7 MB | ||
M-Drawing | MCAD FC A3 IP21 B | 01 Oct, 2016 | 3.0 MB | JPG | |
M-Drawing | MCAD FC A3 IP21 B | 01 Oct, 2016 | 3.2 MB | DXF | |
M-Drawing | MCAD FC A3 IP21 B | 01 Oct, 2016 | 13.8 MB | STP | |
M-Drawing | MCAD FC A3 IP21 B | 01 Oct, 2016 | 1.7 MB | ||
M-Drawing | MCAD FC A5 IP55 66 | 01 Oct, 2019 | 10.2 MB | DXF | |
M-Drawing | MCAD FC A5 IP55 66 | 01 Oct, 2019 | 1.0 MB | ||
M-Drawing | MCAD FC A5 IP55 66 | 01 Oct, 2019 | 27.6 MB | STP | |
M-Drawing | MCAD FC A5 IP55 66 w switch | 01 Oct, 2019 | 11.4 MB | DXF | |
M-Drawing | MCAD FC A5 IP55 66 w switch | 01 Oct, 2019 | 1.1 MB | ||
M-Drawing | MCAD FC A5 IP55 66 w switch | 01 Oct, 2019 | 55.7 MB | STP | |
M-Drawing | MCAD FC B4 IP20 | 01 Sep, 2016 | 10.4 MB | STP | |
M-Drawing | MCAD FC B4 IP20 | 01 Sep, 2016 | 2.4 MB | JPG | |
M-Drawing | MCAD FC B4 IP20 | 01 Sep, 2016 | 6.1 MB | DXF | |
M-Drawing | MCAD FC B4 IP20 | 01 Sep, 2016 | 2.0 MB | ||
M-Drawing | MCAD FC B4 IP20 OPTION | 01 Sep, 2016 | 10.8 MB | STP | |
M-Drawing | MCAD FC B4 IP20 OPTION | 01 Sep, 2016 | 2.4 MB | JPG | |
M-Drawing | MCAD FC B4 IP20 OPTION | 01 Sep, 2016 | 6.3 MB | DXF | |
M-Drawing | MCAD FC B4 IP20 OPTION | 01 Sep, 2016 | 2.0 MB | ||
M-Drawing | MCAD FC C3 IP20 OPTION | 01 Sep, 2016 | 15.4 MB | DXF | |
M-Drawing | MCAD FC C3 IP20 OPTION | 01 Sep, 2016 | 13.8 MB | STP | |
M-Drawing | MCAD FC C3 IP20 OPTION | 01 Sep, 2016 | 2.7 MB | JPG | |
M-Drawing | MCAD FC C3 IP20 OPTION | 01 Sep, 2016 | 2.9 MB | ||
M-Drawing | MCAD FC D1h 177r0374 | 01 Mar, 2021 | 1.6 MB | DXF | |
M-Drawing | MCAD FC D1h 177r0374 | 01 Mar, 2021 | 39.8 MB | STP | |
M-Drawing | MCAD FC D1h 177r0374 | 01 Mar, 2021 | 161.5 KB | DXF | |
M-Drawing | MCAD FC D1h 177r0374 | 01 Mar, 2021 | 1.7 MB | DXF | |
M-Drawing | MCAD FC D1h 177r0374 | 01 Mar, 2021 | 584.3 KB | ||
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 58.0 MB | DXF | |
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 5.0 MB | JPG | |
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 6.6 MB | JPG | |
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 11.4 MB | ||
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 2.0 MB | ||
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 3.5 MB | JPG | |
M-Drawing | MCAD FC D1n | 01 Sep, 2020 | 3.5 MB | JPG | |
M-Drawing | MCAD FC D2h 177r0375 | 01 Mar, 2021 | 711.6 KB | ||
M-Drawing | MCAD FC D2h 177r0375 | 01 Mar, 2021 | 2.0 MB | DXF | |
M-Drawing | MCAD FC D2h 177r0375 | 01 Mar, 2021 | 2.2 MB | DXF | |
M-Drawing | MCAD FC D2h 177r0375 | 01 Mar, 2021 | 183.3 KB | DXF | |
M-Drawing | MCAD FC D2h 177r0375 | 01 Mar, 2021 | 34.8 MB | STP | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 1.2 MB | ||
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 4.0 MB | JPG | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 3.5 MB | JPG | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 12.6 MB | ||
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 28.9 MB | DXF | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 3.4 MB | JPG | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 110.9 MB | STP | |
M-Drawing | MCAD FC D2n | 01 Sep, 2020 | 4.6 MB | JPG | |
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 162.1 KB | DXF | |
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 30.2 MB | STP | |
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 2.5 MB | DXF | |
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 1.1 MB | ||
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 2.1 MB | DXF | |
M-Drawing | MCAD FC D3h 177r0339 | 01 Apr, 2021 | 1.2 MB | DXF | |
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 3.0 MB | DXF | |
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 38.1 MB | STP | |
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 1.4 MB | ||
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 3.9 MB | DXF | |
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 1.8 MB | DXF | |
M-Drawing | MCAD FC D4h 177r0340 | 01 Apr, 2021 | 181.9 KB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 2.3 MB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 191.2 KB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 2.5 MB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 2.1 MB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 2.5 MB | DXF | |
M-Drawing | MCAD FC D5h 177r0490 | 01 Feb, 2021 | 1.4 MB | ||
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 1.1 MB | ||
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 1.7 MB | DXF | |
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 1.8 MB | DXF | |
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 2.2 MB | DXF | |
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 186.1 KB | DXF | |
M-Drawing | MCAD FC D6h 177r0491 | 30 Nov, 2020 | 2.8 MB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 208.7 KB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 2.5 MB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 3.3 MB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 6.3 MB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 3.3 MB | DXF | |
M-Drawing | MCAD FC D7h 177r0492 | 01 Feb, 2021 | 2.8 MB | ||
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 3.1 MB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Aug, 2016 | 16.0 MB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 2.5 MB | ||
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 166.7 KB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 1.4 MB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 2.8 MB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 2.7 MB | DXF | |
M-Drawing | MCAD FC D8h 177r0493 | 01 Feb, 2021 | 6.0 MB | DXF | |
M-Drawing | MCAD FC E1h IP54 | 01 Mar, 2021 | 2.2 MB | DXF | |
M-Drawing | MCAD FC E1h IP54 | 01 Mar, 2021 | 47.1 MB | STP | |
M-Drawing | MCAD FC E1h IP54 | 01 Mar, 2021 | 613.3 KB | ||
M-Drawing | MCAD FC E1h IP54 | 01 Mar, 2021 | 2.4 MB | DXF | |
M-Drawing | MCAD FC E2h IP54 | 01 Mar, 2021 | 2.4 MB | DXF | |
M-Drawing | MCAD FC E2h IP54 | 01 Mar, 2021 | 628.2 KB | ||
M-Drawing | MCAD FC E2h IP54 | 01 Mar, 2021 | 47.6 MB | STP | |
M-Drawing | MCAD FC E2h IP54 | 01 Mar, 2021 | 2.3 MB | DXF | |
M-Drawing | MCAD FC E3h IP20 | 01 Mar, 2021 | 1.9 MB | DXF | |
M-Drawing | MCAD FC E3h IP20 | 01 Mar, 2021 | 1.5 MB | DXF | |
M-Drawing | MCAD FC E3h IP20 | 01 Mar, 2021 | 1.3 MB | DXF | |
M-Drawing | MCAD FC E3h IP20 | 01 Mar, 2021 | 700.1 KB | ||
M-Drawing | MCAD FC E3h IP20 | 01 Mar, 2021 | 30.0 MB | STP | |
M-Drawing | MCAD FC E3h with Loadshare/Regen | 01 Mar, 2021 | 28.8 MB | STP | |
M-Drawing | MCAD FC E4h IP20 | 01 Aug, 2020 | 1.7 MB | DXF | |
M-Drawing | MCAD FC E4h IP20 | 01 Aug, 2020 | 1.4 MB | DXF | |
M-Drawing | MCAD FC E4h IP20 | 01 Aug, 2020 | 741.9 KB | ||
M-Drawing | MCAD FC E4h IP20 | 01 Aug, 2020 | 2.3 MB | DXF | |
M-Drawing | MCAD FC E4h IP20 | 01 Aug, 2020 | 31.9 MB | STP | |
M-Drawing | MCAD FC E4h with Loadshare/Regen | 01 Mar, 2021 | 30.4 MB | STP | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 53.9 MB | DXF | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 53.9 MB | DXF | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 30.7 MB | STP | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 9.1 MB | JPG | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 6.7 MB | JPG | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 1.1 MB | ||
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 53.2 MB | DXF | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 5.8 MB | JPG | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 8.3 MB | ||
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 5.9 MB | JPG | |
M-Drawing | MCAD FC E9 | 01 Sep, 2020 | 53.2 MB | DXF | |
M-Drawing | MCAD FC F1 F2 F3 F4 F18 Back in out Kit | 01 Oct, 2019 | 22.0 MB | DXF | |
M-Drawing | MCAD FC F1 F2 F3 F4 F18 Back in out Kit | 01 Oct, 2019 | 4.4 MB | ||
M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Mounting | 01 Oct, 2019 | 28.2 MB | DXF | |
M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Mounting | 01 Oct, 2019 | 5.1 MB | ||
M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Side Entry Kit | 01 Oct, 2019 | 343.3 KB | ||
M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Side Entry Kit | 01 Oct, 2019 | 1.5 MB | DXF | |
M-Drawing | MCAD FC F1 F2 IP54 Input Terminals | 01 Oct, 2019 | 3.0 MB | ||
M-Drawing | MCAD FC F1 F2 IP54 Input Terminals | 01 Oct, 2019 | 16.1 MB | DXF | |
M-Drawing | MCAD FC F1 F3 F10 F11 F18 Output Term | 01 Oct, 2019 | 19.1 MB | DXF | |
M-Drawing | MCAD FC F1 F3 F10 F11 F18 Output Term | 01 Oct, 2019 | 3.9 MB | ||
M-Drawing | MCAD FC F1 IP54 | 01 Oct, 2019 | 43.4 MB | STP | |
M-Drawing | MCAD FC F10 F11 Back in out Cooling Kit | 01 Oct, 2019 | 2.2 MB | ||
M-Drawing | MCAD FC F10 F11 Back in out Cooling Kit | 01 Oct, 2019 | 12.0 MB | DXF | |
M-Drawing | MCAD FC F12 F13 Back in out Cooling Kit | 01 Oct, 2019 | 2.3 MB | ||
M-Drawing | MCAD FC F12 F13 Back in out Cooling Kit | 01 Oct, 2019 | 12.7 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 4.0 MB | ||
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 6.5 MB | JPG | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 28.5 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 28.4 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 28.3 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 28.6 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 5.2 MB | ||
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 28.4 MB | DXF | |
M-Drawing | MCAD FC F18 | 01 Sep, 2020 | 4.6 MB | JPG | |
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 28.6 MB | DXF | |
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 28.4 MB | DXF | |
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 28.5 MB | DXF | |
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 28.4 MB | DXF | |
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 4.0 MB | ||
M-Drawing | MCAD FC F18 IP54 Mounting | 01 Oct, 2019 | 28.3 MB | DXF | |
M-Drawing | MCAD FC F2 F4 F12 F13 Output Terminals | 01 Oct, 2019 | 18.6 MB | DXF | |
M-Drawing | MCAD FC F2 F4 F12 F13 Output Terminals | 01 Oct, 2019 | 3.6 MB | ||
M-Drawing | MCAD FC F2 IP54 | 01 Oct, 2019 | 47.8 MB | STP | |
M-Drawing | MCAD FC F3 F4 F18 Input Terminals | 01 Oct, 2019 | 11.8 MB | DXF | |
M-Drawing | MCAD FC F3 F4 F18 Input Terminals | 01 Oct, 2019 | 1.8 MB | ||
M-Drawing | MCAD FC F3 IP54 | 01 Oct, 2019 | 54.3 MB | STP | |
M-Drawing | MCAD FC F4 IP54 | 01 Oct, 2019 | 33.9 MB | STP | |
M-Drawing | MCAD FC F8 F9 Back in out Cooling Kit | 01 Oct, 2019 | 7.2 MB | DXF | |
M-Drawing | MCAD FC F8 F9 Back in out Cooling Kit | 01 Oct, 2019 | 1.3 MB | ||
M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Input Term | 01 Oct, 2019 | 1.5 MB | ||
M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Input Term | 01 Oct, 2019 | 13.9 MB | DXF | |
M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Mounting | 01 Oct, 2019 | 27.7 MB | DXF | |
M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Mounting | 01 Oct, 2019 | 1.3 MB | ||
M-Drawing | MCAD PLV D10H IP54 DISCO BOTENTRY TOPEXI | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV D10H IP54 DISCON | 01 Jul, 2019 | 2.5 MB | ||
M-Drawing | MCAD PLV D10H IP54 DISCON DUDT | 01 Jul, 2019 | 2.4 MB | ||
M-Drawing | MCAD PLV D10H IP54 FD CN DDTCM BTEN TPEX | 01 Jul, 2019 | 3.6 MB | ||
M-Drawing | MCAD PLV D10H IP54 FUSDIS CON DUDT CM | 01 Jul, 2019 | 3.5 MB | ||
M-Drawing | MCAD PLV D10H IP54 FUSDISCON | 01 Jul, 2019 | 2.7 MB | ||
M-Drawing | MCAD PLV D10H IP54 LHDP FUSDISCON CON | 01 Jul, 2019 | 3.4 MB | ||
M-Drawing | MCAD PLV D10H IP54 WO OPTIONS | 01 Jul, 2019 | 2.2 MB | ||
M-Drawing | MCAD PLV D9H IP54 CB DVDT CM | 01 Jul, 2019 | 1.8 MB | ||
M-Drawing | MCAD PLV D9H IP54 CON DVDT CM | 01 Jul, 2019 | 2.4 MB | ||
M-Drawing | MCAD PLV D9H IP54 CONTACTER | 01 Jul, 2019 | 2.4 MB | ||
M-Drawing | MCAD PLV D9H IP54 FD CN DDT CM BTET TPET | 01 Jul, 2019 | 2.5 MB | ||
M-Drawing | MCAD PLV D9H IP54 FUSDISCONNECTOR | 01 Jul, 2019 | 2.1 MB | ||
M-Drawing | MCAD PLV D9H IP54 LHDP DIS TOPENTRY EXIT | 01 Jul, 2019 | 2.6 MB | ||
M-Drawing | MCAD PLV D9H IP54 LHDP FUSDIS CON DUDTCM | 01 Jul, 2019 | 3.8 MB | ||
M-Drawing | MCAD PLV D9H IP54 SWITCHDIS DUDT CM | 01 Jul, 2019 | 2.1 MB | ||
M-Drawing | MCAD PLV E5H IP54 CIRCUITBREAKER | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E5H IP54 CONTACTOR | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E5H IP54 DISCON CON DVDT | 01 Jul, 2019 | 3.3 MB | ||
M-Drawing | MCAD PLV E5H IP54 FUSDIS CON DVDT | 01 Jul, 2019 | 3.4 MB | ||
M-Drawing | MCAD PLV E5H IP54 FUSDIS CON TOPEXIT | 01 Jul, 2019 | 3.3 MB | ||
M-Drawing | MCAD PLV E5H IP54 FUSDISCON CONTACTOR | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E5H IP54 LHDP CM DVDT | 01 Jul, 2019 | 3.1 MB | ||
M-Drawing | MCAD PLV E5H IP54 SWITCH DISCON | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E5H IP54 SWITCHDISCON CONTACTER | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E6H IP54 CB | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV E6H IP54 CONTACTOR | 01 Jul, 2019 | 2.8 MB | ||
M-Drawing | MCAD PLV E6H IP54 FU SWI DIS | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV E6H IP54 FUDIS CON | 01 Jul, 2019 | 3.3 MB | ||
M-Drawing | MCAD PLV E6H IP54 FUS SWI DIS CON | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV E6H IP54 MULTI IO WITH DUDT | 01 Jul, 2019 | 3.3 MB | ||
M-Drawing | MCAD PLV E6H IP54 SW DIS | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV E6H IP54 SWIDIS CON | 01 Jul, 2019 | 2.9 MB | ||
M-Drawing | MCAD PLV E6H IP54 WITH SINE WAVE | 01 Jul, 2019 | 3.9 MB | ||
EPLAN-files | MCB 108 | 01 Mar, 2019 | 1.1 MB | ZIP | |
EPLAN-files | MCB 108 coated | 01 Mar, 2019 | 1.1 MB | ZIP | |
EPLAN-files | MCB 109 | 01 Mar, 2019 | 976.5 KB | ZIP | |
EPLAN-files | MCB 109 coated | 01 Mar, 2019 | 976.5 KB | ZIP | |
EPLAN-files | MCB 112 | 01 Mar, 2019 | 1.7 MB | ZIP | |
EPLAN-files | MCB 114 | 01 Mar, 2019 | 967.8 KB | ZIP | |
EPLAN-files | MCB 114 coated | 01 Mar, 2019 | 967.8 KB | ZIP | |
E-Drawing | Wiring Schematic FC 102/202 1.1-90 kW | 01 Mar, 2017 | 64.3 KB | ||
E-Drawing | Wiring Schematic FC 110-400 kW D-frame | 01 Oct, 2015 | 60.0 KB | ||
E-Drawing | Wiring Schematic FC 315-1400 kW | 01 May, 2010 | 297.6 KB | ||
E-Drawing | Wiring Schematic FC 355-800 kW E | 01 Dec, 2016 | 60.8 KB | ||
E-Drawing | Wiring Schematic Low Harmonic Drive | 01 Jun, 2015 | 184.0 KB |
Software
MyDrive® Suite provides all the software you need to select, integrate, program, and operate VLT® HVAC Drive FC 102, in one place.
Type | Name | Language | Updated | Version | Status | Download | File type |
---|---|---|---|---|---|---|---|
Software Tools | SISTEMA Library for Danfoss Drives | 01 Jan, 2018 | RL | 283.1 KB | ZIP | ||
PLC LIBRARIES | VLT® AOI for Rockwell Studio 5000 | 17 Dec, 2019 | 1.00 | RL | 7.2 MB | ZIP | |
Fieldbus Configuration Files | VLT® Drives DeviceNet EDS | 31 May, 2021 | RL | 2.2 MB | ZIP | ||
Fieldbus Configuration Files | VLT® Drives EtherNet/IP EDS | 27 Jun, 2016 | RL | 59.8 KB | ZIP | ||
Fieldbus Configuration Files | VLT® Drives PROFIBUS PCA Block | 19 Mar, 2008 | RL | 465.8 KB | ZIP | ||
Software Tools | VLT® Energy Box | 27 Sep, 2012 | 2.1.0.1 | RL | 15.3 MB | ZIP | |
Fieldbus Configuration Files | VLT® EtherNet/IP Add-on Instructions | 27 Sep, 2013 | RL | 443.0 KB | ZIP | ||
Fieldbus Configuration Files | VLT® HVAC Drive FC 102 LNS Plug-in | 23 Jun, 2008 | RL | 3.7 MB | ZIP | ||
Fieldbus Configuration Files | VLT® HVAC Drive FC 102 LonWorks | 13 Mar, 2009 | RL | 97.2 KB | ZIP | ||
Software Tools | VLT® HVAC Drive Simulator | 27 Jun, 2017 | 05.02 | RL | 2.9 MB | ZIP | |
VLT MCT 10 Support File | VLT® HVAC Drive Support File V7.01 | 28 Jan, 2022 | 7.01 | RL | 4.5 MB | ZIP | |
VLT MCT 10 Support File | VLT® HVAC Drive Support File V7.30 | 05 Dec, 2022 | 7.30 | RL | 4.7 MB | ZIP | |
PLC LIBRARIES | VLT® Library for B&R Automation | 17 Dec, 2019 | 1.00 | RL | 7.1 MB | ZIP | |
PLC LIBRARIES | VLT® Library for TIA Portal | 17 Dec, 2019 | 1.12 | RL | 11.9 MB | ZIP | |
PLC LIBRARIES | VLT® Library for TwinCAT 3 | 17 Dec, 2019 | 1.12 | RL | 8.4 MB | ZIP | |
PLC LIBRARIES | VLT® Library for Unity Pro | 17 Dec, 2019 | 1.00 | RL | 9.7 MB | ZIP | |
Fieldbus Configuration Files | VLT® MCA101 PROFIBUS GSD | 03 Nov, 2010 | RL | 76.9 KB | ZIP | ||
Fieldbus Configuration Files | VLT® MCA120 PROFINET GSDML | 21 Feb, 2018 | RL | 719.2 KB | ZIP | ||
Software Tools | VLT® Motion Control Tool MCT10 | 14 Jul, 2022 | 5.50 | RL | 944.1 MB | ZIP | |
Software Tools | VLT® Motion Control Tool MCT31 | 17 Oct, 2017 | 2.0.4 | RL | 25.2 MB | ZIP |
Related applications
Pumps, fans, compressors.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for commercial compressorsVariable speed control with AC drives enables you to reduce energy consumption by running compressor applications at a lower speed.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for compressorsImprove your COP and save on energy consumption by applying Danfoss AC drives to optimize the capacity control of refrigeration compressors, condensers and evaporators.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for compressors in residential buildingsVariable speed control of a chiller allows you to provide constant pressure regulation while matching the capacity to the actual need based on measurements in the system. Speed control is beneficial when a compressor runs for long periods at partial load. Reduce operational costs by running applications at a lower speed which reduces energy consumption. And reduce installation costs by optimizing the system and the compressor itself.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for fansGet more out of your air handling units, using fan control that gives you easy air filter monitoring and built-in fire safety features.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for fans in commercial buildingsWith user-friendly interfaces, distributed intelligence and reduced power consumption, Danfoss AC drives optimize the performance of fans.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives for fans in food and beverage applicationsVariable speed fan control reduces costs by trimming energy consumption, and improves comfort levels by avoiding noise-generating frequencies.
Troubleshooting
Case stories
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }How does Beat the Storm deliver more fun for 80% less CO2?DENMARK: Universe Science Park saves 80% on emissions and the power bill for its wind tunnel attraction “Beat the Storm”, with the intelligent VLT® HVAC drive.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Carlsberg brewery drives down energy consumption by 50%POLAND: For more than a decade, Danfoss drives have halved the power consumption at Carlsberg’s Okocim Brewery. The brewery uses less water and has lowered its emissions too.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Retrofitting Keppel Bay Tower for a Zero Energy futureSINGAPORE: With Danfoss EC+ concept for HVAC systems, Keppel Bay Tower uses 45% less energy and has achieved Green Mark Platinum Zero Energy building status.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Drives secure fresh air inside South America’s tallest buildingA huge number of Danfoss drives secure comfortable temperatures and cut down energy use inside Chile’s famous Costanera Center.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Fuel cells for electric transportation of the futureNuvera Fuel Cells solutions successfully support many applications such as replacing battery packs of electric forklifts, converting big port trucks from diesel to hydrogen, and electrical mobility for buses. In the innovative laboratory of Nuvera Fuel Cells, the VACON® NXP series contributes to evaluating the performance of E-45 and E-60 fuel cell engines for electrical mobility under authentic conditions.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Danfoss Drives controlling the temperature at COP26GLASGOW: From October 31st to November 12th, 2021, the world will be watching the Scottish Event Campus (SEC) in Glasgow, UK, where delegates from almost 200 countries will carry out some of the most important discussions about the future of our planet and take firm steps for ramping up global climate action during the Conference of the Parties and is the United Nations’ annual conference on climate change (COP26).
News
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Optimize your HVAC with 3D Building Information Modeling filesTuesday, February 28, 2023Use 3D Building Information Modeling (BIM) files for VLT® HVAC Drive FC 102 to document your building, application, or air handling unit installation in AutoCAD Revit. Reduce the risk of errors and save time on system design.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Increase system availability with PROFINET S2 and MRPTuesday, February 14, 2023PROFINET S2 and Media Redundancy Protocol (MRP) integrate Danfoss VLT® drives seamlessly into highly redundant systems.
-
if (isSmallPicture) {
; } else if (isBigColumns) { } else { }Harmonic mitigation reduces filter power loss by 60%Tuesday, January 17, 2023With 60% lower power losses compared to similar filters, Danfoss Advanced Active Filter AAF 007 can rescue your energy budget. Enjoy harmonic mitigation, power factor correction and imbalance compensation, all in one product. This filter is compatible for use with any drive from the entire Danfoss product portfolio.