Valves

NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.

SVL Flexline™ product platform targeted to meet industrial refrigeration requirements. The range cover five different functions with just two valve models.

SCA-X are check and stop valves with built-in stop valve function. SCA-X valves are available in angleway versions.

SCA-X SS are check and stop valves in stainless steel with a built-in stop valve function. SCA-X SS are available in angleway versions. The valves are designed to open at very low differential pressures, allow favourable flow conditions and are easy to disassemble for inspection and service. SCA-X are equipped with vented cap and have internal backseating enabling the spindle seal to be replaced whilst the valve still under pressure.

CHV-X check valves are available in angleway versions. The valves are designed to open at very low differential pressures, allow favorable flow conditions and are easy to disassemble for inspection and service.

CTR 3-way heat reclaim valve is designed to allow full proportional control of the surplus heat from compressor pack into the heat exchanger of transcritical heat reclaim solutions, securing availability of heat and hot water. The CTR valve prevents pressure peaks eliminating costly system down-time and the risk of insufficient heat supply for store heating and hot water, regardless of installation size.

Danfoss ICV Flexline™ guarantees you a reliable, safe and green solution - both now and in the future. The product family consists of an ICS pilot operated control, ICM motor operated control and ICLX 2-step solenoid valve.

The new ICLX valves are part of the Danfoss ICV Flexline™ series. The ICLX valves are 2-step servo-operated main valves with pilot solenoid valves.

The ICM motor operated valves from Danfoss ICV Flexline™ series are quick and simple to handle, install and service due to their low weight and compact design.

The ICS pilot operated servo valves from Danfoss ICV Flexline™ platform are quick and simple to handle, install and service due to their low weight and compact design.

For robust, efficient, and responsive control, Danfoss world-renowned, ADAP Kool® expansion valves, AKV, cover applications ranging from lower capacity commercial applications with CO2 and HFC refrigerant to large industrial applications with ammonia as a refrigerant.

The CCMT is a highly reliable electric pressure regulating valve optimized for transcritical CO₂ refrigeration. The valve has versatile applications in the transcritical system. 

ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration applications. The valve piston and linear positioning design is fully balanced, providing bi-flow feature as well as solenoid tight shut-off function in both flow directions. ETS valves are compatible with electronic control solutions from Danfoss and other manufacturers.

The Danfoss Multi Ejector Solution™ ensures that transcritical CO₂ applications for retailers become energy efficient in any climate.

Unmatched freedom is the keyword of ICF Flexline™ valve stations. As part of the Flexline™ platform, these valve stations are based on a unique modular concept.

Solenoid valves for A/C and commercial refrigeration for fluorinated refrigerants and CO₂ (R744). Solenoid valves and coils are normally supplied separately and then assembled without tools, providing optimum flexibility and product availability.

EVT high pressure range is a direct or servo operated valve specially designed for CO2 transcritical refrigeration systems.

Solenoid valve for industrial applications for different media e.g. drinkable water, brine, steam, air or oil. Solenoid valves and coils are normally supplied separately and then assembled without tools, providing optimum flexibility and product availability.

Danfoss Saginomiya 4-way Reversing Valves are used in reversible applications such as heat pumps or reversible air conditioning units and chillers.

Unmatched freedom is the keyword of ICF Flexline™ valve stations. As part of the Flexline™ platform, these valve stations are based on a unique modular concept.

Thermostatic expansion valves (TXV) are available as parts programs, i.e. with separate valve body and orifice assemblies, or as complete valves (fixed orifice). The category also contains thermostatic injection valves.

The SFA 10 safety valve is a highly reliable safety valve designed for Food Retail and Industrial Refrigeration applications.

GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.  GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.

Thermostatic valves are a simple and reliable control solution requiring neither electricity nor control air. An example of an application is automatic control of water temperature in cooling systems. The valves are available with a remote or built-in sensor.

BML is a manual shut-off valve designed for installation in the liquid, suction and hot gas lines of refrigeration plants. The valve can be delivered with flare, ODF solder or ODF solder with extended ends. In the same product category, BMT 6 is a three-way manual shut-off valve with similar characteristics.

The REG manual expansion valves provide precise refrigerant control for industrial refrigeration, enhancing system performance and efficiency. Including stainless steel and 140B.