The ESBE VRG series of valves are designed for mixing and diverting water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems.
The VRG valve replaces the MG and G series of valves and provides additional operational features. By either mixing or diverting, the fluid temperature leaving the valve is regulated by the VRG in either a manual operation or electronic when coupled with the ARA600 Series or 90 Series electronic motorized actuator.
Excellent performance in valve regulation.
Lowest internal leakage of flow @ 14.5psi Δp:
Compact valve design.
Suitable for closed loop heating or chilled systems, maximum 50% glycol.
VRG valve body material composed of dezincification resistant brass (DZR).
The ESBE VRG Series 3-way & 4-way mixing valves includes a range of compact, low leakage valves. For easy manual operation the valves are equipped with non-slip knobs and end stops for an operational angle of 90°. The valve position scale can be turned over and rotated allowing many different mounting positions. Together with ARA600 and Series 90 actuators, the VRG valves are easily automated and have excellent regulating accuracy due to the unique valve to actuator interface.
*Note: If 90 series actuators are used on valves 2” and below, mounting kit 193B1616 must be used.
Typical piping schematic for electronic temperature control provides a fixed temperature for radiant floor circuits or snow/ice melt.*CRA 112/122 can control up to two unique temperature setpoints based on external input signal.
Typical piping schematic for electronic temperature control provides a fixed space or discharge temperature for a variety of uses such as air handlers. Alternate sensor location allows for return temperature protection to heat source.*CRA 112/122 can control up to two unique temperature setpoints based on external input signal.
Typical primary/secondary piping schematic.
Typical 4-way motorized valve for use with radiant floor heating. ARA600 or 90 Series actuators used with outdoor reset.
Automatic control of supply temperature regulated snow and ice melt systems with many advanced features.
Manual balancing of hydronic heating and cooling circuits.
*With thermostatic or electric operator. See Thermostatic Radiator Valve Catalog for additional options.
Department of Conservation and Natural Resources conscientiously chooses low-energy, high-comfort solutions to heat the new Resource Management Center in Pennsylvania’s Buchanan State Forest district.
Discover how Danfoss ESBE valves and actuators efficiently controlled the hydronic heating system.
Read case study
ESBE Type F valves are flanged valves made of high-performing cast iron and available up to 6" in size and suitable for mixing or diverting applications in heating and cooling systems. Type F valves assemble to the 90 Series or ARC/ARD Series of motorized actuators.
ESBE ARA 600 Series actuators are compact, motorized actuators for operating ESBE mixing valves up to 2". The 24V actuators replace the 60 Series, have improved mounting and operating functions and can easily be manually operated.
The ESBE ARC/ ARD series of high torque rotary, low voltage, motorized actuators provide a 90°operating range of rotation. Suitable for assembly to ESBE Type F series, 3 and 4-way valves that range from 2” to 6” in size and alternatively applied as damper actuators.
The ESBE CRA Series of setpoint controls includes a combined motorized actuator and constant flow temperature control with an adjustable temperature setting.
The easy to use CRA series includes an LCD backlit digital display and is available in two varieties; the CRA112 - for use with ESBE valves up to 2", and the CRA122 - for use with all sizes of ESBE valves.
The ESBE 90 Series of 24V electronic motorized actuators are direct mount to rotate ESBE 3 & 4-way rotary valves in hydronic heating and cooling applications. The 90 Series motorized actuator provides additional torque compared to the ARA series, and can be installed on all ESBE 3 & 4-way rotary valves, in sizes from ½” to 6”. 90 Series linkage kits are also available capable of adapting the motorized actuator to Viessmann, Honeywell, Centra DR/ZR, Landis & Staefa and TA VTR styles of valves.
Find information on hydronic heating troubleshooting, including our top frequently asked questions, our video library, links to hydronic heating literature, a link to our newsletter, and more.
Go to Technical Support page