Specifically designed for demanding mobile equipment applications
The compact size (20% smaller than conventional gear motors), with side and rear port options, adds to the design flexibility for installation in tighter places. Additionally, the use of high temperature seals and a dust resistant shaft seal protector improve performance and help extend operating life.
The D-motor differs slightly from the D-pump in internal design. The D-pump uses a thicker dual pressure-balanced thrust plate design to ensure high starting torque and long life with lower viscosity oils. The design of the body allows for high axial and radial external loads without the need for an outrigger bearing assembly.
For fan drive applications, a variety of valve options are offered for great flexibility. This allows for integrated reversing, proportional relief, fixed relief, and anti-cavitation valves.
Specifically designed for demanding mobile equipment applications where maximum performance is required at peak power levels and operating temperatures. Our cast iron motors ensure great productivity and excellent fuel efficiency along with reduced vehicle emissions.
Features and benefits
Non-tin-coated external surface allowing higher bearing loads due to high pressures
Thrust plate design for high efficiency over a wide temperature range
Teflon® coated bushings for extended life under extreme temperature and pressure conditions
A high strength cast iron construction for efficient performance in continuous operation
Custom engineered shaft bearings and dual pressure-balanced thrust plates for high starting torque and long life
Easy installation in optimized machines due to compact, power-dense design
Viton® seals are standard to sustain higher temperature and fluid capabilities
A variety of integrated valve options
Documents
Related products
-
if (isSmallPicture) {
Our aluminum gear motors including fan drives are the ideal choice for a wide range of applications. From small to medium and large off-highway vehicles. Ultracompact fan drives are also available. They are ideal when both compactness and high efficiency are required.
-
if (isSmallPicture) {
Our gear pumps are robust and reliable. They are the ideal choice for a wide range of applications. From small to medium and large off-highway vehicles, as well as for industrial applications. Low noise gear pumps are also available. They are the ideal solution for steering applications in cab-equipped mobile machines and for electric/hybrid machines.
-
if (isSmallPicture) {
shhark® is our latest evolutionary low noise patented gear pump technology. An outstanding performance guaranteed throughout the whole life of the pump.
-
if (isSmallPicture) {
Our cast iron gear pumps are 20% smaller than conventional gear products, and give great power density in a small package. Typical applications are skid steer loaders and heavy-duty machines.
Related applications
-
if (isSmallPicture) {
Space is limited on construction sites, and there are people working everywhere. Contractors need machines that can safely maneuver in a tight spot. At the same time they still need to be powerful enough to get the job done. At Danfoss, we deliver the components, software, and controls that enable your machines to run safely, efficiently and effectively.
-
if (isSmallPicture) {
Cranes and other large handling machines are required to operate within very specific load ranges. Danfoss provides pressure transmitters that supply load limiting systems with crucial data, safeguarding your equipment, your load, and your operator.
-
if (isSmallPicture) {
Rough, sloping terrain and cramped working conditions call for robust and reliable forestry machines. We make sure you can manage everything from cutting trees and transport to preparing the forest floor for replanting. We have the smart hydraulic solutions your machines need for precise and efficient forestry operations.
-
if (isSmallPicture) {
Think about the heaviest challenges in the open mining, road building and construction industry. Tasks such as cutting through rock or the Arctic permafrost; compacting thick layers of hot asphalt. As well as lifting huge, prefabricated wall panels into place.
-
if (isSmallPicture) {
Lawn and turf machines must adapt to their surroundings and the season – becoming sweepers or snow blowers as required. At Danfoss, we make hydraulic solutions to provide that flexibility and ensure safe and efficient operation.
-
if (isSmallPicture) {
Advanced hydraulic systems from Danfoss deliver the machine performance that ensures road builders can meet their deadlines.
Related solutions
-
if (isSmallPicture) {
Optimize fan drive solutions with the Reverse Displacement Motor (RDM) and the new Series 45 Fan Drive Control (FDC). The RDM is a breakthrough in technological innovation and engineering.
-
if (isSmallPicture) {
Danfoss is here to help. With our complete fan drive solution, Danfoss is able to help you maximize available engine power. As well as, decrease fuel costs and increase operator productivity.
