Analogue Thermostats

Analogue thermostats

Analogue thermostats are electronic control units which allow you to set the heating system type and adjust control parameters.

3 types of thermostats are available:

for air/room temperature control and limitation of floor temperatures—with room sensor and floor sensor
for air/room temperature control—with room sensor only
for floor temperature control—with floor sensor only.

DEVIreg™ 130/132 / ECtemp 130/132

DEVIreg™ 130/132 / ECtemp 130/132 is a line of simple electronic 16 Amp thermostats which can be installed directly on the wall. The thermostats have only one button for adjusting the temperature and for OFF mode. Furthermore, they have an LED indicator showing standby (green light) and heating (red light) periods.

DEVIreg™ 330 / ECtemp 330

DEVIreg™ 330 / ECtemp 330 is a line of simple electronic thermostats for installation in electric cabinets with a DIN rail attachment.

The thermostat must be installed via an all-pole disconnection switch. It has an LED indicating standby (green light) and heating (red light) periods.

DEVIreg™ 530/531/532 / ECtemp 530/531/532

DEVIreg™ 530/531/532 / ECtemp 530/531/532 is a line of simple electronic 15 Amp thermostats with a 2-pole switch and for flush-mounted fixing. The thermostats are used to control indoor floor heating systems.

DEVIreg™ Hotwater

DEVIreg™ Hotwater is an electronic programmable controller with 4 channels for DIN rail mounting. Every channel can be set individually to maintain hot water with the option to disinfect manually or on a schedule. 2 sensors have to be used to measure the temperature for each channel.

Building Management System (BMS) control is possible through the Modbus RS485 serial interface.

DEVIreg™ Hotwater

Features and benefits using analogue thermostats

Precise control of temperature

Automatic control of electric heating system

Economic control of electric heating system

Possibility of in-wall, on-wall, or DIN rail installation

Easy temperature setpoint selection

Documents

Documents
Type	Name	Language	Valid for	Updated	Download	File type

Tools and apps

ECTemp Smart

ECtemp™ Smart application offers wireless control of electric floor heating systems equipped with ECtemp™ Smart thermostat. The app turns your mobile device into an intuitive floor heating remote control.

Code generator for ECtemp Touch thermostat

Try the virtual code generator for the ECtemp Touch thermostat for Electric Heating. This virtual instrument allows to create special HEXA code according to specific ECtemp Touch thermostat’s settings in order to have two-way communication to setup them by distance.

Read more about the Code generator for ECtemp Touch thermostat

Warranty

At Danfoss, it is important for us to deliver high-quality products with long-lasting effects. Should you, against all expectations, experience a problem with your product, Danfoss offers a warranty for electric heating products valid from the date of purchase that was no later than 2 years from production date.

Depending on the product, the product guarantee is valid for two years, five years, or twenty years.

Product warranty covers costs for:

product replacement with a new comparable product or repair of the product
transportation costs

Warranty terms

Learning

Visit our Learning Center

Danfoss offers online training materials for technicians and designers working with electric heating. There are 3 e-lessons available free and on-demand through Danfoss Learning portal. For more information, register in our support section by following the link or find the overview of available relevant trainings in the table below.

Related applications

Something went wrong. We are working on this. Please, try again a bit later.

Contact us

For further information, please contact us for technical support

Analogue Thermostats