Digital controllers

Digital controllers have unique features allowing you to reduce energy waste. Equipped with temperature and moisture sensors, control modes, and special functions, they ensure accurate temperature settings, reducing energy consumption costs by up to 40 percent.

The DEVIreg™ 850 / ECtemp™ 850 is fully automatic, with temperature and moisture sensors for when ice and snow melts on grounds, such as pavements, roads, and ramps as well as for roof, gutter, gutter valleys and down pipes.

DEVIreg™ 850 / ECtemp 850

The DEVIreg™ 850 / ECtemp 850 version IV is an advanced thermostat with an LED display used for outdoor ground or roof applications. The sensors provide information about both moisture level and temperature, resulting in optimal control of the heating system.
The controller can handle up to 2 independent areas.

In the dual / combination systems it is possible to prioritize between the zones, e.g. if only a limited power output is available.

Applications:
• Roofs, gutters, downpipes, drain lines
• Ground, walkways, outdoor steps
• Road/concrete asphalt
• Mastic asphalt

DEVIreg™ Multi

DEVIreg™ Multi is 7 channel electronic programmable controller to be installed on DIN rail. Every channel can be individually set up with three control modes—with temperature sensor, time proportional power regulation without sensor, and manually on/off with time limitation. Сhannel inputs can be selected via software between 8 types of temperature sensors including NTC 15 kOhm at 25°C. Modbus RS485 opto-insulated serial interface gives the possibility for BMS control.

DEVIreg™ Multi

Features and benefits using outdoor digital controllers

Single, combination or dual zones

Up to 4 sensors

Moisture and temperature sensing

Alarm function

Efficient control snow removal

Up to 40% Energy saving

Automatic ”Around the Clock” snow clearing service

Documents

Documents
Type	Name	Language	Valid for	Updated	Download	File type

Tools and apps

EH Plugin for AutoCAD

The Plugin supports your engineering and design journey by making your work faster due to simple functionalities in calculating all lengths, dimensions and product data of cables and mats. It covers all applications within Electric Heating projects: Electric floor heating, Ice & Snow melting systems, Pipe tracing, Cold stores, Sport fields, Vineyards etc.
By utilizing Plugin, you will reduce design time for the project, provide all necessary information for installers in HTML/PDF format: BoM, resistance value check list, warranty list format. It means all project information can be consolidated in one file.

Plugin can be used with AutoCAD 2021.

Warranty

At Danfoss, it is important for us to deliver high-quality products with long-lasting effects. Should you, against all expectations, experience a problem with your product, Danfoss offers a warranty for electric heating products valid from the date of purchase that was no later than 2 years from production date.

Depending on the product, the product guarantee is valid for two years, five years, or twenty years.

Product warranty covers costs for:

product replacement with a new comparable product or repair of the product
transportation costs

Warranty terms

Case studies

Something went wrong. We are working on this. Please, try again a bit later.

Related applications

Something went wrong. We are working on this. Please, try again a bit later.

Contact us

For further information, please contact us for technical support

Digital controllers