Self-limiting heating cables
The self-limiting heating cables for indoors are used for maintenance of the hot water supply and other fluids that need to maintain a certain temperature. The self-limiting capability of the cable ensures that the output increases or decreases according to the surrounding temperature. It ensures hot water in all taps, providing savings compared to a circulatory hot water system.
Heating cable reduces water waste as hot water is immediately supplied.
Protection against Legionella—the system maintains the water supply at the required temperature level and provides appropriate disinfection to suppress the Legionella bacteria.
Lower initial investment of DHW (Domestic Hot Water) system without circulation—appx. 50% less pipes, insulation, valves, and pumps to be installed as no return pipes and insulation are required.
Space saving—no need for return pipe gives more room in service ducts.
Features and benefits using self-limiting cables
Provide appropriate disinfection to suppress the Legionella bacteria
Reduce water waste as you can get hot water immediately
50% less pipes, insulation, valves, and pumps to be installed since no return pipes are required
Heating cables provide power where needed adapting output according to the ambient temperature
Related products
-
if (isSmallPicture) {
Digital controllers have the unique features allowing you to reduce energy waste. Some thermostats are fitted with Wi-Fi allowing remote control of heating systems via mobile application.
-
if (isSmallPicture) {
The self-limiting heating cables for indoors are used for maintenance of the hot water supply and other fluids that need to maintain a certain temperature. The self-limiting capability of the cable ensures that the output increases or decreases according to the surrounding temperature. It ensures hot water in all taps, providing savings compared to a circulatory hot water system.
-
if (isSmallPicture) {
Analogue thermostats are electronic control units allowing setting the heating system type and adjustment of control parameters.
-
if (isSmallPicture) {
Self-limiting heating cables are designed with a temperature-dependent resistant element between two parallel copper bus wires. When the bus wires are connected to the mains, a current goes through the temperature-dependent resistant element which will then heat.
-
if (isSmallPicture) {
Analogue controllers are thermostats with temperature sensors allowing you to switch the system on and off depending on settings.
