Optimaliseer uw HVAC-toepassing – met de laagste levenscycluskosten in elk klimaat
Profiteer van een nog hogere betrouwbaarheid en lagere totale exploitatiekosten (Total Cost of Ownership, TCO) in uw verwarmings-, ventilatie en airconditioninginstallaties (HVAC-installaties), met deze unieke frequentieregelaar die geoptimaliseerd is voor gebouwautomatiseringssystemen. Meer informatie in de Selectiegids VLT® HVAC Drive FC 102.
Vanwege extreme klimaten, ontoegankelijke machinekamers en afgelegen gebieden op onze planeet is er meer dan ooit behoefte aan de best mogelijke procesregeling voor HVAC-installaties. Dat geldt ook voor uw dagelijkse kritische functies en kostbare systemen, vanwege de steeds toenemende concurrentie en hogere rendementseisen. De verbeterde VLT® HVAC Drive is ontworpen met het oog op hoge prestaties en biedt u meer ruimte om te manoeuvreren. Hij biedt een oplossing voor uw uitdagingen, en ultieme betrouwbaarheid. En ook nog eens de laagste levenscycluskosten.
Door de World Alliance for Efficient Solutions erkend als een Solar Impulse Efficient Solution.
De 1000 Efficient Solutions omvatten het beste wat de wereld te bieden heeft op het gebied van schone en rendabele oplossingen die het milieu beschermen. De VLT HVAC Drive behaalde een topscore van 4,0, op basis van de criteria levensvatbaarheid, inzetbaarheid en duurzaamheid.
Voedingsspanning en vermogensbereik
- 3 x 200-240 V...1,1-45 kW
- 3 x 380-480 V...1,1-1000 kW
- 3 x 525-600 V...1,1-90 kW
- 3 x 525-690 V...1,1-1400 kW
Low harmonic drive
- 3 x 380-480 V...160-710 kW
12-puls frequentieregelaar
- 3 x 380-500 V...315-1000 kW
- 3 x 525-690 V...450-1400 kW
Kenmerken en voordelen
Verlaag uw totale exploitatiekosten (TCO). De aanhoudende behoefte aan een lagere TCO is een uitdaging die de VLT® HVAC Drive aankan.
Installeer hem buiten in extreme klimaten. Schroeiende hitte en strenge vorst zijn geen enkel probleem voor de verbeterde VLT® HVAC Drive. Deze frequentieregelaar biedt ook volledige betrouwbaarheid in buitenopstellingen, bij een temperatuurbereik van maar liefst +50 °C tot -25 °C.
Regel meerdere IE5 PM-motoren. Til het energierendement van uw ventilator- en pomptoepassingen naar een hoger plan. U kunt zelfs meerdere IE5 permanentmagneetmotoren (PM) regelen met slechts één frequentieregelaar.
Bespaar tijd. Parameterinstellingen en foutopsporing van de frequentieregelaar kunt u buiten de LBK uitvoeren, dankzij het externe LCP. Maximaliseer de bedrijfstijd door de uitschakeltijd te verkorten, omdat het niet nodig is om de LBK te openen en vervolgens weer af te sluiten.
Bepaal zelf welke motor u wilt gebruiken. Kies de motor waaraan u de voorkeur geeft, om wat voor reden dan ook: van leveringszekerheid tot optimalisatie van de prestaties. De verbeterde VLT® HVAC Drive is niet alleen geoptimaliseerd voor het regelen van inductiemotoren, permanentmagneetmotoren en synchrone reluctantiemotoren; ons ontwikkelingsteam doet er ook alles aan om compatibiliteit met toekomstige motortechnologieën te integreren in toekomstige software-updates.
Bepaal zelf hoe u wilt communiceren. De mogelijkheid om de frequentieregelaar op eenvoudige wijze in uw gebouwautomatiseringssysteem te integreren, is cruciaal voor een optimale regeling. De VLT® HVAC Drive is uitgerust met een aantal HVAC-specifieke communicatieprotocollen, zoals BACnet/IP, die u de flexibiliteit bieden voor integratie in zowel nieuwe als bestaande gebouwautomatiseringssystemen.
Documentatie
| Type | Naam | Taal | Geldig voor | Bijgewerkt | Downloaden | Bestandstype |
|---|---|---|---|---|---|---|
| Fact sheet | DrivePro® Exchange | Nederlands, Vlaams | Meerdere | 29 mei, 2018 | 420.9 KB | |
| Fact sheet | DrivePro® Extended Warranty | Nederlands, Vlaams | Meerdere | 29 mei, 2018 | 808.2 KB | |
| Brochure | DrivePro® Life Cycle Services | Nederlands, Vlaams | Meerdere | 05 mrt., 2019 | 2.5 MB | |
| Fact sheet | DrivePro® Preventive Maintenance | Nederlands, Vlaams | Meerdere | 22 aug., 2018 | 499.7 KB | |
| Fact sheet | DrivePro® Remote Expert Support | Nederlands, Vlaams | Meerdere | 01 apr., 2021 | 428.7 KB | |
| Fact sheet | DrivePro® Remote Monitoring | Nederlands, Vlaams | Meerdere | 01 apr., 2021 | 438.4 KB | |
| Fact sheet | DrivePro® Spare Parts | Nederlands, Vlaams | Meerdere | 01 okt., 2019 | 986.0 KB | |
| Fact sheet | DrivePro® Start-up | Nederlands, Vlaams | Meerdere | 22 aug., 2018 | 441.9 KB | |
| Brochure | Ecodesign - meet requirements | Nederlands, Vlaams | Meerdere | 06 mei, 2016 | 405.8 KB | |
| Brochure | Energy efficiency - 3 questions | Nederlands, Vlaams | Meerdere | 10 mei, 2016 | 254.2 KB | |
| Case story | Equinix server rooms | Nederlands, Vlaams | Meerdere | 11 mei, 2018 | 1.9 MB | |
| Certificate | Manufacturers declaration_FC_VLT | Meerdere | 29 jun., 2023 | 781.1 KB | ||
| Certificate | Marine safety_ABS | Meerdere | 05 aug., 2016 | 16.1 MB | ||
| Case story | Micheville Tunnel LX | Nederlands, Vlaams | Meerdere | 03 nov., 2017 | 1.1 MB | |
| Brochure | Motor technology – your choice | Nederlands, Vlaams | Meerdere | 10 mei, 2016 | 893.8 KB | |
| Operating guide | Safe Torque Off | Nederlands, Vlaams | Meerdere | 01 mei, 2019 | 1.3 MB | |
| Installation guide | Safe Torque Off IG_Lang pack1 | Meerdere | 13 okt., 2022 | 1.7 MB | ||
| Installation guide | Safe Torque Off IG_Lang pack1 | Meerdere | 13 okt., 2022 | 1.7 MB | ||
| Installation guide | Safe Torque Off IG_Lang pack2 | Meerdere | 01 nov., 2022 | 1.2 MB | ||
| Installation guide | Safe Torque Off IG_Lang pack3 | Meerdere | 01 nov., 2022 | 658.1 KB | ||
| Brochure | Ten things about Ecodesign | Nederlands, Vlaams | Meerdere | 01 mrt., 2021 | 409.8 KB | |
| Case story | Van Asten Group - Netherlands | Nederlands, Vlaams | Meerdere | 01 jun., 2021 | 953.5 KB | |
| Installation guide | VLT FC 90-400 kW IG_language_pack1 | Meerdere | 11 jan., 2023 | 23.2 MB | ||
| Installation guide | VLT FC 90-400 kW IG_language_pack1 | Meerdere | 11 jan., 2023 | 23.2 MB | ||
| Installation guide | VLT FC 90-400 kW IG_language_pack2 | Meerdere | 11 jan., 2023 | 19.0 MB | ||
| Installation guide | VLT FC 90-400 kW IG_language_pack2 | Meerdere | 11 jan., 2023 | 19.0 MB | ||
| Installation guide | VLT FC 90-400 kW IG_language_pack3 | Meerdere | 11 jan., 2023 | 22.6 MB | ||
| Installation guide | VLT FC 90-400 kW IG_language_pack3 | Meerdere | 11 jan., 2023 | 22.6 MB | ||
| Operating guide | VLT HVAC Drive FC 102, 1.1-90 kW | Nederlands, Vlaams | Meerdere | 01 jan., 2022 | 2.9 MB | |
| Operating guide | VLT® AKD 102 Drive 110–250 kW | Nederlands, Vlaams | Meerdere | 21 apr., 2023 | 8.8 MB | |
| Fact sheet | VLT® drive with enclosure size E | Nederlands, Vlaams | Meerdere | 14 sep., 2017 | 378.1 KB | |
| Installation guide | VLT® FC 0.25-90 kW IG_LP2 | Meerdere | 01 nov., 2022 | 17.0 MB | ||
| Installation guide | VLT® FC 0.25-90 kW IG_LP2 | Meerdere | 01 nov., 2022 | 41.6 MB | ||
| Installation guide | VLT® FC 0.25-90 kW IG_LP3 | Meerdere | 01 nov., 2022 | 17.3 MB | ||
| Installation guide | VLT® FC 0.25–90 kW_IG_LP1 | Meerdere | 01 nov., 2022 | 38.4 MB | ||
| Design guide | VLT® HVAC Drive FC 102 1.1-90 kW | Nederlands, Vlaams | Meerdere | 13 jun., 2014 | 7.1 MB | |
| Operating guide | VLT® HVAC Drive FC 102 110-400kW D-frame | Nederlands, Vlaams | Meerdere | 01 jan., 2022 | 13.3 MB | |
| Design guide | VLT® HVAC Drive FC 102 355-1400 kW | Nederlands, Vlaams | Meerdere | 01 mei, 2018 | 12.9 MB | |
| Programming guide | VLT® HVAC Drive FC 102 SW 4.x | Nederlands, Vlaams | Meerdere | 15 jun., 2016 | 6.3 MB | |
| Operating guide | VLT® HVAC Drive FC 102, 355-800 kW, Encl | Nederlands, Vlaams | Meerdere | 01 sep., 2018 | 13.9 MB | |
| Brochure | VLT® HVAC Drive FC102 SG | Nederlands, Vlaams | Meerdere | 01 sep., 2021 | 10.7 MB | |
| Operating guide | VLT® Low Harmonic Drive Operating Instr. | Nederlands, Vlaams | Meerdere | 16 okt., 2009 | 7.2 MB | |
| Fact sheet | VLT® Pressure Transmitter PTU 025 | Nederlands, Vlaams | Meerdere | 16 nov., 2018 | 285.9 KB | |
| Operating guide | VLT® PTC Thermistor Card MCB 112 | Meerdere | 16 dec., 2022 | 3.0 MB | ||
| Fact sheet | VLT® Wireless Control Panel LCP 103 | Nederlands, Vlaams | Meerdere | 13 apr., 2018 | 905.1 KB |
3D-modellen en -tekeningen
| Type | Naam | Taal | Bijgewerkt | Downloaden | Bestandstype |
|---|---|---|---|---|---|
| EPLAN-files | FC-102N110T4E54H4XGCXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 859.0 KB | ZIP | |
| EPLAN-files | FC-102N160T4E5MN4TGC7XXSXXXXAXBKCXXXXD0 | 01 feb., 2019 | 6.8 MB | ZIP | |
| EPLAN-files | FC-102N200T4E5MN4TGC7XXSXXXXAXBKCXXXXD0 | 01 feb., 2019 | 5.8 MB | ZIP | |
| EPLAN-files | FC-102N250T4E21H4XGCXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 980.1 KB | ZIP | |
| EPLAN-files | FC-102N315T4H54H4XGC3XXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 881.9 KB | ZIP | |
| EPLAN-files | FC-102N560T4E54H4TGC3XXSXXXXA0B4CXXXXD0 | 01 feb., 2019 | 1.7 MB | ZIP | |
| EPLAN-files | FC-102P11KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 1.8 MB | ZIP | |
| EPLAN-files | FC-102P11KT4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 jun., 2020 | 1.0 MB | ZIP | |
| EPLAN-files | FC-102P15KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 1.8 MB | ZIP | |
| EPLAN-files | FC-102P15KT4E21H1TGCXXXSXXXXALBXCXXXXD0 | 01 mrt., 2022 | 1.3 MB | ZIP | |
| EPLAN-files | FC-102P15KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 2.4 MB | ZIP | |
| EPLAN-files | FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 1.8 MB | ZIP | |
| EPLAN-files | FC-102P18KT4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 apr., 2020 | 1.0 MB | ZIP | |
| EPLAN-files | FC-102P1M2T7E21H2XGCXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 2.2 MB | ZIP | |
| EPLAN-files | FC-102P22KT4E21H1TGCXXXSXXXXALBXCXXXXD0 | 01 mrt., 2022 | 954.2 KB | ZIP | |
| EPLAN-files | FC-102P22KT4E21H1XGXXXXSXXXXAXBKCXXXXDX | 01 mrt., 2022 | 953.8 KB | ZIP | |
| EPLAN-files | FC-102P22KT4E21H1XGXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 897.8 KB | ZIP | |
| EPLAN-files | FC-102P22KT4E66H3XGXXXXSXXXXAXBXCXXXXDX | 07 dec., 2022 | 2.0 MB | ZIP | |
| EPLAN-files | FC-102P2K2T4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 jun., 2020 | 724.0 KB | ZIP | |
| EPLAN-files | FC-102P30KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 2.6 MB | ZIP | |
| EPLAN-files | FC-102P30KT4E21H1XGX1XXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 721.6 KB | ZIP | |
| EPLAN-files | FC-102P30KT4E55H1XGX1XXSXXXXAXBXCXXXXDX | 01 mrt., 2019 | 717.9 KB | ZIP | |
| EPLAN-files | FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 1.9 MB | ZIP | |
| EPLAN-files | FC-102P37KT4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 1.5 MB | ZIP | |
| EPLAN-files | FC-102P3K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX | 01 apr., 2020 | 1.1 MB | ZIP | |
| EPLAN-files | FC-102P45KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 2.1 MB | ZIP | |
| EPLAN-files | FC-102P4K0T4Z55H1XGXXOXSXXXXAXBXCXXXXDX | 01 apr., 2020 | 1.5 MB | ZIP | |
| EPLAN-files | FC-102P55KT4E20H2XGXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 1.6 MB | ZIP | |
| EPLAN-files | FC-102P560T4E54H2TGC7XKSXXXXA0B4CXXXXD0 | 01 feb., 2019 | 2.5 MB | ZIP | |
| EPLAN-files | FC-102P5K5T4E20H1XXXXXXSXXXXA0BXCXXXXDX | 01 apr., 2020 | 620.8 KB | ZIP | |
| EPLAN-files | FC-102P75KT4E20H2XGCXXXSXXXXAXBXCXXXXDX | 30 nov., 2020 | 1.6 MB | ZIP | |
| EPLAN-files | FC-102P75KT4E55H2XGXXXXSXXXXAXBXCXXXXDX | 01 feb., 2019 | 1.5 MB | ZIP | |
| EPLAN-files | FC-102P7K5T4E20H1XNXXXXSXXXXAXBXCXXXXDX | 01 mrt., 2022 | 611.4 KB | ZIP | |
| EPLAN-files | FC-102P7K5T4E55H1XGXXXXSXXXXAXBXCXXXXDX | 01 apr., 2020 | 676.9 KB | ZIP | |
| EPLAN-files | FC-102P90KT4E55H2TGXXXXSXXXXA0B0CXXXXD0 | 01 feb., 2019 | 1.6 MB | ZIP | |
| EPLAN-files | MCA 104 | 01 mrt., 2019 | 1.2 MB | ZIP | |
| EPLAN-files | MCA 104 coated | 01 mrt., 2019 | 1.2 MB | ZIP | |
| EPLAN-files | MCA 108 | 01 mrt., 2019 | 1.3 MB | ZIP | |
| EPLAN-files | MCA 108 coated | 01 mrt., 2019 | 1.3 MB | ZIP | |
| EPLAN-files | MCA 109 | 01 mrt., 2019 | 1.1 MB | ZIP | |
| EPLAN-files | MCA 109 coated | 01 mrt., 2019 | 1.1 MB | ZIP | |
| EPLAN-files | MCA 121 | 01 mrt., 2019 | 1.6 MB | ZIP | |
| EPLAN-files | MCA 121 coated | 01 mrt., 2019 | 1.6 MB | ZIP | |
| EPLAN-files | MCA 122 | 01 mrt., 2019 | 1.3 MB | ZIP | |
| EPLAN-files | MCA 122 coated | 01 mrt., 2019 | 1.3 MB | ZIP | |
| EPLAN-files | MCA 125 | 01 mrt., 2019 | 1.2 MB | ZIP | |
| BIM-files | MCAD FC 102 A2 IP20 1.1-4kW | 01 sep., 2018 | 2.8 MB | ZIP | |
| BIM-files | MCAD FC 102 A2 IP20 AB 1.1-4kW | 01 sep., 2018 | 2.8 MB | ZIP | |
| BIM-files | MCAD FC 102 A2 IP20 ABC 1.1-4kW | 01 sep., 2018 | 2.8 MB | ZIP | |
| BIM-files | MCAD FC 102 A2 IP21 1.1-4kW | 01 sep., 2018 | 2.8 MB | ZIP | |
| BIM-files | MCAD FC 102 A2 IP21 AB-1.1-4kW | 01 sep., 2018 | 2.8 MB | ZIP | |
| BIM-files | MCAD FC 102 A3 IP20 1.1-7.5kW | 01 sep., 2018 | 5.9 MB | ZIP | |
| BIM-files | MCAD FC 102 A3 IP20 AB 1.1-7.5kW | 01 sep., 2018 | 5.9 MB | ZIP | |
| BIM-files | MCAD FC 102 A3 IP20 ABC 1.1-7.5kW | 01 sep., 2018 | 5.9 MB | ZIP | |
| BIM-files | MCAD FC 102 A3 IP21 1.1-7.5kW | 01 sep., 2018 | 5.9 MB | ZIP | |
| BIM-files | MCAD FC 102 A3 IP21 AB 1.1-7.5kW | 01 sep., 2018 | 5.9 MB | ZIP | |
| BIM-files | MCAD FC 102 A4 IP55 1.1-4kW | 01 sep., 2018 | 2.7 MB | ZIP | |
| BIM-files | MCAD FC 102 A4 IP66 1.1-4kW | 01 sep., 2018 | 2.7 MB | ZIP | |
| BIM-files | MCAD FC 102 A5 IP55 1.1-7.5kW | 01 sep., 2018 | 8.0 MB | ZIP | |
| BIM-files | MCAD FC 102 A5 IP66 1.1-7.5kW | 01 sep., 2018 | 8.0 MB | ZIP | |
| BIM-files | MCAD FC 102 B1 IP21 5.5-18kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 B1 IP55 5.5-18kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 B1 IP66 5.5-18kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 B2 IP21 11-30kW | 01 sep., 2018 | 3.2 MB | ZIP | |
| BIM-files | MCAD FC 102 B2 IP55 11-30kW | 01 sep., 2018 | 3.2 MB | ZIP | |
| BIM-files | MCAD FC 102 B2 IP66 15-30kW | 01 sep., 2018 | 1.7 MB | ZIP | |
| BIM-files | MCAD FC 102 B3 IP20 5.5-18kW | 01 sep., 2018 | 3.1 MB | ZIP | |
| BIM-files | MCAD FC 102 B3 IP20 AB 5.5-18kW | 01 sep., 2018 | 3.1 MB | ZIP | |
| BIM-files | MCAD FC 102 B3 IP20 ABC 5.5-18kW | 01 sep., 2018 | 3.1 MB | ZIP | |
| BIM-files | MCAD FC 102 B3 IP21 5.5-18kW | 01 sep., 2018 | 3.1 MB | ZIP | |
| BIM-files | MCAD FC 102 B3 IP21 AB 5.5-18kW | 01 sep., 2018 | 3.1 MB | ZIP | |
| BIM-files | MCAD FC 102 B4 IP20 11-37kW | 01 sep., 2018 | 4.6 MB | ZIP | |
| BIM-files | MCAD FC 102 B4 IP21 11-37kW | 01 sep., 2018 | 4.6 MB | ZIP | |
| BIM-files | MCAD FC 102 C1 IP21 18-55kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 C1 IP55 18-55kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 C1 IP66 18-55kW | 01 sep., 2018 | 2.9 MB | ZIP | |
| BIM-files | MCAD FC 102 C2 IP21 37-90kW | 01 sep., 2018 | 3.5 MB | ZIP | |
| BIM-files | MCAD FC 102 C2 IP55 37-90kW | 01 sep., 2018 | 3.5 MB | ZIP | |
| BIM-files | MCAD FC 102 C2 IP66 37-90kW | 01 sep., 2018 | 2.0 MB | ZIP | |
| BIM-files | MCAD FC 102 C3 IP20 22-55kW | 01 sep., 2018 | 2.7 MB | ZIP | |
| BIM-files | MCAD FC 102 C3 IP21 22-55kW | 01 sep., 2018 | 2.7 MB | ZIP | |
| BIM-files | MCAD FC 102 C4 IP20 37-90kW | 01 sep., 2018 | 2.1 MB | ZIP | |
| BIM-files | MCAD FC 102 C4 IP21 37-90kW | 01 sep., 2018 | 2.1 MB | ZIP | |
| M-Drawing | MCAD FC A2 IP20 | 01 okt., 2016 | 2.1 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 | 01 okt., 2016 | 8.3 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 | 01 okt., 2016 | 1.8 MB | ||
| M-Drawing | MCAD FC A2 IP20 A | 01 okt., 2016 | 8.6 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 A | 01 okt., 2016 | 2.2 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 A | 01 okt., 2016 | 1.9 MB | ||
| M-Drawing | MCAD FC A2 IP20 A | 01 okt., 2016 | 7.2 MB | DXF | |
| M-Drawing | MCAD FC A2 IP20 AB | 01 okt., 2016 | 2.2 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 AB | 01 okt., 2016 | 8.5 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 AB | 01 okt., 2016 | 1.9 MB | ||
| M-Drawing | MCAD FC A2 IP20 ABC | 01 okt., 2016 | 4.6 MB | DXF | |
| M-Drawing | MCAD FC A2 IP20 ABC | 01 okt., 2016 | 9.4 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 ABC | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 ABC | 01 okt., 2016 | 2.0 MB | ||
| M-Drawing | MCAD FC A2 IP20 AC | 01 okt., 2016 | 9.4 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 AC | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 AC | 01 okt., 2016 | 2.0 MB | ||
| M-Drawing | MCAD FC A2 IP20 AC | 01 okt., 2016 | 7.8 MB | DXF | |
| M-Drawing | MCAD FC A2 IP20 B | 01 okt., 2016 | 8.3 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 B | 01 okt., 2016 | 2.1 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 B | 01 okt., 2016 | 1.8 MB | ||
| M-Drawing | MCAD FC A2 IP20 C | 01 okt., 2016 | 2.2 MB | JPG | |
| M-Drawing | MCAD FC A2 IP20 C | 01 okt., 2016 | 9.0 MB | STP | |
| M-Drawing | MCAD FC A2 IP20 C | 01 okt., 2016 | 1.9 MB | ||
| M-Drawing | MCAD FC A2 IP21 | 30 nov., 2020 | 1.6 MB | ||
| M-Drawing | MCAD FC A2 IP21 | 30 nov., 2020 | 2.8 MB | JPG | |
| M-Drawing | MCAD FC A2 IP21 | 30 nov., 2020 | 6.8 MB | STP | |
| M-Drawing | MCAD FC A2 IP21 B | 01 okt., 2016 | 1.6 MB | ||
| M-Drawing | MCAD FC A2 IP21 B | 01 okt., 2016 | 9.0 MB | STP | |
| M-Drawing | MCAD FC A2 IP21 B | 01 okt., 2016 | 2.8 MB | JPG | |
| M-Drawing | MCAD FC A3 IP20 | 30 nov., 2020 | 1.7 MB | ||
| M-Drawing | MCAD FC A3 IP20 | 30 nov., 2020 | 10.3 MB | STP | |
| M-Drawing | MCAD FC A3 IP20 | 30 nov., 2020 | 2.2 MB | JPG | |
| M-Drawing | MCAD FC A3 IP20 A | 01 okt., 2016 | 1.7 MB | ||
| M-Drawing | MCAD FC A3 IP20 A | 01 okt., 2016 | 10.4 MB | STP | |
| M-Drawing | MCAD FC A3 IP20 A | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC A3 IP20 A | 01 okt., 2016 | 3.7 MB | DXF | |
| M-Drawing | MCAD FC A3 IP20 AB | 01 okt., 2016 | 1.7 MB | ||
| M-Drawing | MCAD FC A3 IP20 AB | 01 okt., 2016 | 10.1 MB | STP | |
| M-Drawing | MCAD FC A3 IP20 AB | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC A3 IP20 ABC | 01 okt., 2016 | 2.1 MB | ||
| M-Drawing | MCAD FC A3 IP20 ABC | 01 okt., 2016 | 3.4 MB | JPG | |
| M-Drawing | MCAD FC A3 IP20 ABC | 01 okt., 2016 | 9.2 MB | STP | |
| M-Drawing | MCAD FC A3 IP21 | 01 okt., 2016 | 1.6 MB | ||
| M-Drawing | MCAD FC A3 IP21 | 01 okt., 2016 | 3.0 MB | JPG | |
| M-Drawing | MCAD FC A3 IP21 | 01 okt., 2016 | 10.7 MB | STP | |
| M-Drawing | MCAD FC A3 IP21 B | 01 okt., 2016 | 1.7 MB | ||
| M-Drawing | MCAD FC A3 IP21 B | 01 okt., 2016 | 3.0 MB | JPG | |
| M-Drawing | MCAD FC A3 IP21 B | 01 okt., 2016 | 13.8 MB | STP | |
| M-Drawing | MCAD FC A3 IP21 B | 01 okt., 2016 | 3.2 MB | DXF | |
| M-Drawing | MCAD FC A5 IP55 66 | 01 okt., 2019 | 27.6 MB | STP | |
| M-Drawing | MCAD FC A5 IP55 66 | 01 okt., 2019 | 10.2 MB | DXF | |
| M-Drawing | MCAD FC A5 IP55 66 | 01 okt., 2019 | 1.0 MB | ||
| M-Drawing | MCAD FC A5 IP55 66 w switch | 01 okt., 2019 | 55.7 MB | STP | |
| M-Drawing | MCAD FC A5 IP55 66 w switch | 01 okt., 2019 | 11.4 MB | DXF | |
| M-Drawing | MCAD FC A5 IP55 66 w switch | 01 okt., 2019 | 1.1 MB | ||
| M-Drawing | MCAD FC B1 IP21 | 01 okt., 2016 | 2.2 MB | JPG | |
| M-Drawing | MCAD FC B1 IP21 | 01 okt., 2016 | 18.6 MB | STP | |
| M-Drawing | MCAD FC B1 IP21 WITH DISCONNECTOR | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC B1 IP21 WITH DISCONNECTOR | 01 okt., 2016 | 20.0 MB | STP | |
| M-Drawing | MCAD FC B1 IP66 WITH DISCONNECTOR | 01 okt., 2016 | 20.6 MB | STP | |
| M-Drawing | MCAD FC B1 IP66 WITH DISCONNECTOR | 01 okt., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC B2 IP21 WITH DISCONNECTOR | 01 sep., 2016 | 19.4 MB | STP | |
| M-Drawing | MCAD FC B2 IP21 WITH DISCONNECTOR | 01 sep., 2016 | 2.3 MB | ||
| M-Drawing | MCAD FC B2 IP21 WITH DISCONNECTOR | 01 sep., 2016 | 2.4 MB | JPG | |
| M-Drawing | MCAD FC B4 IP20 | 01 sep., 2016 | 2.0 MB | ||
| M-Drawing | MCAD FC B4 IP20 | 01 sep., 2016 | 2.4 MB | JPG | |
| M-Drawing | MCAD FC B4 IP20 | 01 sep., 2016 | 10.4 MB | STP | |
| M-Drawing | MCAD FC B4 IP20 | 01 sep., 2016 | 6.1 MB | DXF | |
| M-Drawing | MCAD FC B4 IP20 OPTION | 01 sep., 2016 | 2.0 MB | ||
| M-Drawing | MCAD FC B4 IP20 OPTION | 01 sep., 2016 | 10.8 MB | STP | |
| M-Drawing | MCAD FC B4 IP20 OPTION | 01 sep., 2016 | 2.4 MB | JPG | |
| M-Drawing | MCAD FC B4 IP20 OPTION | 01 sep., 2016 | 6.3 MB | DXF | |
| M-Drawing | MCAD FC B4 IP21 | 01 sep., 2016 | 2.0 MB | ||
| M-Drawing | MCAD FC B4 IP21 | 01 sep., 2016 | 2.1 MB | JPG | |
| M-Drawing | MCAD FC B4 IP21 | 01 sep., 2016 | 12.7 MB | STP | |
| M-Drawing | MCAD FC C2 IP21 | 30 nov., 2020 | 1.8 MB | JPG | |
| M-Drawing | MCAD FC C2 IP21 | 30 nov., 2020 | 1.8 MB | JPG | |
| M-Drawing | MCAD FC C2 IP21 | 30 nov., 2020 | 21.4 MB | STP | |
| M-Drawing | MCAD FC C2 IP21 | 30 nov., 2020 | 6.3 MB | ||
| M-Drawing | MCAD FC C2 IP21 | 30 nov., 2020 | 22.4 MB | DOC | |
| M-Drawing | MCAD FC C3 IP20 | 01 sep., 2016 | 2.7 MB | ||
| M-Drawing | MCAD FC C3 IP20 | 01 sep., 2016 | 14.5 MB | STP | |
| M-Drawing | MCAD FC C3 IP20 | 01 sep., 2016 | 2.6 MB | JPG | |
| M-Drawing | MCAD FC C3 IP20 OPTION | 01 sep., 2016 | 2.9 MB | ||
| M-Drawing | MCAD FC C3 IP20 OPTION | 01 sep., 2016 | 2.7 MB | JPG | |
| M-Drawing | MCAD FC C3 IP20 OPTION | 01 sep., 2016 | 13.8 MB | STP | |
| M-Drawing | MCAD FC C3 IP20 OPTION | 01 sep., 2016 | 15.4 MB | DXF | |
| M-Drawing | MCAD FC C3 IP21 | 01 sep., 2016 | 2.2 MB | ||
| M-Drawing | MCAD FC C3 IP21 | 01 sep., 2016 | 19.8 MB | STP | |
| M-Drawing | MCAD FC C3 IP21 | 01 sep., 2016 | 2.3 MB | JPG | |
| M-Drawing | MCAD FC C4 IP20 | 01 sep., 2016 | 3.2 MB | ||
| M-Drawing | MCAD FC C4 IP20 | 01 sep., 2016 | 12.7 MB | STP | |
| M-Drawing | MCAD FC C4 IP20 | 01 sep., 2016 | 3.0 MB | JPG | |
| M-Drawing | MCAD FC C4 IP20 OPTION | 01 sep., 2016 | 3.3 MB | ||
| M-Drawing | MCAD FC C4 IP20 OPTION | 01 sep., 2016 | 3.0 MB | JPG | |
| M-Drawing | MCAD FC C4 IP20 OPTION | 01 sep., 2016 | 13.1 MB | STP | |
| M-Drawing | MCAD FC C4 IP21 | 01 sep., 2016 | 2.3 MB | ||
| M-Drawing | MCAD FC C4 IP21 | 01 sep., 2016 | 2.9 MB | JPG | |
| M-Drawing | MCAD FC C4 IP21 | 01 sep., 2016 | 16.3 MB | STP | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 nov., 2017 | 144.6 KB | DXF | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 nov., 2017 | 1.2 MB | DXF | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 nov., 2017 | 1.6 MB | DXF | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 nov., 2017 | 489.0 KB | ||
| M-Drawing | MCAD FC D1h 177r0374 | 01 mrt., 2021 | 1.6 MB | DXF | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 mrt., 2021 | 584.3 KB | ||
| M-Drawing | MCAD FC D1h 177r0374 | 01 mrt., 2021 | 1.7 MB | DXF | |
| M-Drawing | MCAD FC D1h 177r0374 | 01 mrt., 2021 | 161.5 KB | DXF | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 11.4 MB | ||
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 5.0 MB | JPG | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 3.5 MB | JPG | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 58.0 MB | DXF | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 3.5 MB | JPG | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 6.6 MB | JPG | |
| M-Drawing | MCAD FC D1n | 01 sep., 2020 | 2.0 MB | ||
| M-Drawing | MCAD FC D2h 177r0375 | 01 jun., 2011 | 125.2 KB | DXF | |
| M-Drawing | MCAD FC D2h 177r0375 | 01 jun., 2011 | 2.1 MB | DXF | |
| M-Drawing | MCAD FC D2h 177r0375 | 01 jun., 2011 | 675.1 KB | ||
| M-Drawing | MCAD FC D2h 177r0375 | 01 jun., 2011 | 1.4 MB | DXF | |
| M-Drawing | MCAD FC D2h 177r0375 | 01 mrt., 2021 | 2.2 MB | DXF | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 4.0 MB | JPG | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 110.9 MB | STP | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 3.4 MB | JPG | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 3.5 MB | JPG | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 28.9 MB | DXF | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 12.6 MB | ||
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 4.6 MB | JPG | |
| M-Drawing | MCAD FC D2n | 01 sep., 2020 | 1.2 MB | ||
| M-Drawing | MCAD FC D3h 177r0339 | 01 jun., 2011 | 1.1 MB | ||
| M-Drawing | MCAD FC D3h 177r0339 | 01 apr., 2021 | 162.1 KB | DXF | |
| M-Drawing | MCAD FC D3h 177r0339 | 01 apr., 2021 | 1.1 MB | ||
| M-Drawing | MCAD FC D3h 177r0339 | 01 apr., 2021 | 2.1 MB | DXF | |
| M-Drawing | MCAD FC D3h 177r0339 | 01 apr., 2021 | 30.2 MB | STP | |
| M-Drawing | MCAD FC D4h 177r0340 | 01 apr., 2021 | 38.1 MB | STP | |
| M-Drawing | MCAD FC D4h 177r0340 | 01 apr., 2021 | 3.9 MB | DXF | |
| M-Drawing | MCAD FC F1 F2 F3 F4 F18 Back in out Kit | 01 okt., 2019 | 22.0 MB | DXF | |
| M-Drawing | MCAD FC F1 F2 F3 F4 F18 Back in out Kit | 01 okt., 2019 | 4.4 MB | ||
| M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Mounting | 01 okt., 2019 | 5.1 MB | ||
| M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Mounting | 01 okt., 2019 | 28.2 MB | DXF | |
| M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Side Entry Kit | 01 okt., 2019 | 1.5 MB | DXF | |
| M-Drawing | MCAD FC F1 F2 F3 F4 IP54 Side Entry Kit | 01 okt., 2019 | 343.3 KB | ||
| M-Drawing | MCAD FC F1 F2 IP54 Input Terminals | 01 okt., 2019 | 3.0 MB | ||
| M-Drawing | MCAD FC F1 F2 IP54 Input Terminals | 01 okt., 2019 | 16.1 MB | DXF | |
| M-Drawing | MCAD FC F1 F3 F10 F11 F18 Output Term | 01 okt., 2019 | 3.9 MB | ||
| M-Drawing | MCAD FC F1 F3 F10 F11 F18 Output Term | 01 okt., 2019 | 19.1 MB | DXF | |
| M-Drawing | MCAD FC F1 IP54 | 01 okt., 2019 | 43.4 MB | STP | |
| M-Drawing | MCAD FC F10 F11 Back in out Cooling Kit | 01 okt., 2019 | 2.2 MB | ||
| M-Drawing | MCAD FC F10 F11 Back in out Cooling Kit | 01 okt., 2019 | 12.0 MB | DXF | |
| M-Drawing | MCAD FC F12 F13 Back in out Cooling Kit | 01 okt., 2019 | 2.3 MB | ||
| M-Drawing | MCAD FC F12 F13 Back in out Cooling Kit | 01 okt., 2019 | 12.7 MB | DXF | |
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 28.6 MB | DXF | |
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 28.5 MB | DXF | |
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 4.0 MB | ||
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 28.3 MB | DXF | |
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 28.4 MB | DXF | |
| M-Drawing | MCAD FC F18 IP54 Mounting | 01 okt., 2019 | 28.4 MB | DXF | |
| M-Drawing | MCAD FC F2 F4 F12 F13 Output Terminals | 01 okt., 2019 | 18.6 MB | DXF | |
| M-Drawing | MCAD FC F2 F4 F12 F13 Output Terminals | 01 okt., 2019 | 3.6 MB | ||
| M-Drawing | MCAD FC F2 IP54 | 01 okt., 2019 | 47.8 MB | STP | |
| M-Drawing | MCAD FC F3 F4 F18 Input Terminals | 01 okt., 2019 | 1.8 MB | ||
| M-Drawing | MCAD FC F3 F4 F18 Input Terminals | 01 okt., 2019 | 11.8 MB | DXF | |
| M-Drawing | MCAD FC F3 IP54 | 01 okt., 2019 | 54.3 MB | STP | |
| M-Drawing | MCAD FC F4 IP54 | 01 okt., 2019 | 33.9 MB | STP | |
| M-Drawing | MCAD FC F8 F9 Back in out Cooling Kit | 01 okt., 2019 | 1.3 MB | ||
| M-Drawing | MCAD FC F8 F9 Back in out Cooling Kit | 01 okt., 2019 | 7.2 MB | DXF | |
| M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Input Term | 01 okt., 2019 | 13.9 MB | DXF | |
| M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Input Term | 01 okt., 2019 | 1.5 MB | ||
| M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Mounting | 01 okt., 2019 | 27.7 MB | DXF | |
| M-Drawing | MCAD FC F8 F9 F10 F11 F12 F13 Mounting | 01 okt., 2019 | 1.3 MB | ||
| M-Drawing | MCAD PLV D10H IP54 LHDP FUSDISCON CON | 01 jul., 2019 | 3.4 MB | ||
| M-Drawing | MCAD PLV D10H IP54 WO OPTIONS | 01 jul., 2019 | 2.2 MB | ||
| M-Drawing | MCAD PLV D9H IP54 CB DVDT CM | 01 jul., 2019 | 1.8 MB | ||
| M-Drawing | MCAD PLV D9H IP54 CON DVDT CM | 01 jul., 2019 | 2.4 MB | ||
| M-Drawing | MCAD PLV D9H IP54 CONTACTER | 01 jul., 2019 | 2.4 MB | ||
| M-Drawing | MCAD PLV D9H IP54 FD CN DDT CM BTET TPET | 01 jul., 2019 | 2.5 MB | ||
| M-Drawing | MCAD PLV D9H IP54 FUSDISCONNECTOR | 01 jul., 2019 | 2.1 MB | ||
| M-Drawing | MCAD PLV D9H IP54 LHDP DIS TOPENTRY EXIT | 01 jul., 2019 | 2.6 MB | ||
| M-Drawing | MCAD PLV D9H IP54 LHDP FUSDIS CON DUDTCM | 01 jul., 2019 | 3.8 MB | ||
| M-Drawing | MCAD PLV D9H IP54 SWITCHDIS DUDT CM | 01 jul., 2019 | 2.1 MB | ||
| M-Drawing | MCAD PLV E5H IP54 CIRCUITBREAKER | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 CONTACTOR | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 DISCON CON DVDT | 01 jul., 2019 | 3.3 MB | ||
| M-Drawing | MCAD PLV E5H IP54 FUSDIS CON DVDT | 01 jul., 2019 | 3.4 MB | ||
| M-Drawing | MCAD PLV E5H IP54 FUSDIS CON TOPEXIT | 01 jul., 2019 | 3.3 MB | ||
| M-Drawing | MCAD PLV E5H IP54 FUSDISCON CONTACTOR | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 FUSIBLE DISCONNECTOR | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 LHDP CM DVDT | 01 jul., 2019 | 3.1 MB | ||
| M-Drawing | MCAD PLV E5H IP54 SWITCH DISCON | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 SWITCHDISCON CONTACTER | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E5H IP54 WO OPTIONS | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E6H IP54 CB | 01 jul., 2019 | 2.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 CONTACTOR | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD PLV E6H IP54 FU SWI DIS | 01 jul., 2019 | 2.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 FUDIS CON | 01 jul., 2019 | 3.3 MB | ||
| M-Drawing | MCAD PLV E6H IP54 FUS SWI DIS CON | 01 jul., 2019 | 2.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 MULTI IO WITH DUDT | 01 jul., 2019 | 3.3 MB | ||
| M-Drawing | MCAD PLV E6H IP54 SW DIS | 01 jul., 2019 | 2.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 SWIDIS CON | 01 jul., 2019 | 2.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 WITH SINE WAVE | 01 jul., 2019 | 3.9 MB | ||
| M-Drawing | MCAD PLV E6H IP54 WO IP | 01 jul., 2019 | 2.8 MB | ||
| M-Drawing | MCAD-FC-B1-IP21-PTM | 01 mei, 2021 | 45.4 MB | STP | |
| M-Drawing | MCAD-FC-B2-IP21-PTM | 01 mei, 2021 | 88.7 MB | STP | |
| M-Drawing | MCAD-FC-C1-IP21-PTM | 01 mei, 2021 | 59.3 MB | STP | |
| M-Drawing | MCAD-FC-C2-IP21-PTM | 01 mei, 2021 | 90.2 MB | STP | |
| EPLAN-files | MCB 108 | 01 mrt., 2019 | 1.1 MB | ZIP | |
| EPLAN-files | MCB 108 coated | 01 mrt., 2019 | 1.1 MB | ZIP | |
| EPLAN-files | MCB 109 | 01 mrt., 2019 | 976.5 KB | ZIP | |
| EPLAN-files | MCB 109 coated | 01 mrt., 2019 | 976.5 KB | ZIP | |
| EPLAN-files | MCB 112 | 01 mrt., 2019 | 1.7 MB | ZIP | |
| EPLAN-files | MCB 114 | 01 mrt., 2019 | 967.8 KB | ZIP | |
| EPLAN-files | MCB 114 coated | 01 mrt., 2019 | 967.8 KB | ZIP | |
| M-Drawing | Remote_LCP_holder | 01 okt., 2021 | 677.4 KB | ||
| E-Drawing | Wiring Schematic FC 102/202 1.1-90 kW | 01 mrt., 2017 | 64.3 KB | ||
| E-Drawing | Wiring Schematic FC 110-400 kW D-frame | 01 okt., 2015 | 60.0 KB | ||
| E-Drawing | Wiring Schematic FC 315-1400 kW | 01 mei, 2010 | 297.6 KB | ||
| E-Drawing | Wiring Schematic FC 355-800 kW E | 01 dec., 2016 | 60.8 KB | ||
| E-Drawing | Wiring Schematic Low Harmonic Drive | 01 jun., 2015 | 184.0 KB |
Software
| Type | Naam | Taal | Bijgewerkt | Versie | Status | Downloaden | Bestandstype |
|---|---|---|---|---|---|---|---|
| Software Tools | SISTEMA Library for Danfoss Drives | 01 jan., 2018 | RL | 283.1 KB | ZIP | ||
| PLC LIBRARIES | VLT® AOI for Rockwell Studio 5000 | 17 dec., 2019 | 1.00 | RL | 7.2 MB | ZIP | |
| Fieldbus Configuration Files | VLT® Drives DeviceNet EDS | 31 mei, 2021 | RL | 2.2 MB | ZIP | ||
| Fieldbus Configuration Files | VLT® Drives EtherNet/IP EDS | 27 jun., 2016 | RL | 59.8 KB | ZIP | ||
| Fieldbus Configuration Files | VLT® Drives PROFIBUS PCA Block | 19 mrt., 2008 | RL | 465.8 KB | ZIP | ||
| Software Tools | VLT® Energy Box | 27 sep., 2012 | 2.1.0.1 | RL | 15.3 MB | ZIP | |
| Fieldbus Configuration Files | VLT® EtherNet/IP Add-on Instructions | 27 sep., 2013 | RL | 443.0 KB | ZIP | ||
| Fieldbus Configuration Files | VLT® HVAC Drive FC 102 LNS Plug-in | 23 jun., 2008 | RL | 3.7 MB | ZIP | ||
| Fieldbus Configuration Files | VLT® HVAC Drive FC 102 LonWorks | 13 mrt., 2009 | RL | 97.2 KB | ZIP | ||
| Software Tools | VLT® HVAC Drive Simulator | 27 jun., 2017 | 05.02 | RL | 2.9 MB | ZIP | |
| VLT MCT 10 Support File | VLT® HVAC Drive Support File V7.01 | 28 jan., 2022 | 7.01 | RL | 4.5 MB | ZIP | |
| VLT MCT 10 Support File | VLT® HVAC Drive Support File V7.30 | 05 dec., 2022 | 7.30 | RL | 4.7 MB | ZIP | |
| PLC LIBRARIES | VLT® Library for B&R Automation | 17 dec., 2019 | 1.00 | RL | 7.1 MB | ZIP | |
| PLC LIBRARIES | VLT® Library for TIA Portal | 17 dec., 2019 | 1.12 | RL | 11.9 MB | ZIP | |
| PLC LIBRARIES | VLT® Library for TwinCAT 3 | 17 dec., 2019 | 1.12 | RL | 8.4 MB | ZIP | |
| PLC LIBRARIES | VLT® Library for Unity Pro | 17 dec., 2019 | 1.00 | RL | 9.7 MB | ZIP | |
| Fieldbus Configuration Files | VLT® MCA101 PROFIBUS GSD | 03 nov., 2010 | RL | 76.9 KB | ZIP | ||
| Fieldbus Configuration Files | VLT® MCA120 PROFINET GSDML | 21 feb., 2018 | RL | 719.2 KB | ZIP | ||
| Software Tools | VLT® Motion Control Tool MCT10 | 14 jul., 2022 | 5.50 | RL | 944.1 MB | ZIP | |
| Software Tools | VLT® Motion Control Tool MCT31 | 17 okt., 2017 | 2.0.4 | RL | 25.2 MB | ZIP |
Gerelateerde toepassingen
Pompen, ventilatoren, compressoren.
-
if (isSmallPicture) {
Een toerenregeling met frequentieregelaars maakt het mogelijk om het energieverbruik te verlagen door compressortoepassingen op lagere toeren te laten werken.
-
if (isSmallPicture) {
Verbeter uw COP en bespaar op het energieverbruik door Danfoss frequentieregelaars toe te passen voor het optimaliseren van de capaciteitsregeling van koelcompressoren, condensors en verdampers.
-
if (isSmallPicture) {
Toerenregeling van een chiller stelt u in staat om een constante druk te handhaven terwijl de capaciteit wordt afgestemd op de feitelijke behoefte op basis van metingen in het systeem. Een snelheidsregeling is gunstig wanneer een compressor langere tijd bij deellast werkt. Verlaag de exploitatiekosten door toepassingen op lagere toeren te laten werken en zo meer te besparen op het energieverbruik. De installatiekosten kunt u verlagen door zowel het systeem als de compressor te optimaliseren.
-
if (isSmallPicture) {
Verbeter de prestaties van uw systeem, verleng de levensduur van uw apparatuur en bescherm uw apparatuur tegen lekkage door de werking van de pomp te optimaliseren met behulp van Danfoss frequentieregelaars.
-
if (isSmallPicture) {
Bescherm uw pomp en optimaliseer de prestaties van ventilatie en airconditioning in utiliteitsbouw met behulp van frequentieregelaars.
-
if (isSmallPicture) {
Een toerengeregelde ventilatorbesturing bespaart energie en beperkt het lawaai in technische ruimtes en koelsystemen overal op uw schip.
Neem contact met ons op
Neem contact met ons op voor meer informatie over deze frequentieregelaar of om een offerte aan te vragen.