DEVIreg™ 316 is a simple electronic thermostat with enhanced functionality which can be installed in electric cabinets with a DIN rail attachment. The thermostat is mainly used for frost protection on roofs, in gutters and downpipes. It can be also used to control ventilation, cooling or snow melting on ground, pipe tracing and similar installations.
Applications:
• Roofs, gutters, downpipes, drain lines
• Ground, walkways, outdoor steps
• Pipe frost protection
• Tank frost protection
• Sprinkler systems
DEVIreg™ 330 is a line of simple electronic thermostats to be installed in electric cabinets with a DIN rail attachment. To measure and control the desired temperature either a wire sensor (in the set) or an external indoor/outdoor air sensor must be used. The thermostat must be installed via an all-pole disconnection switch. It has a LED indicating standby (green light) and heating (red light) periods.
Applications:
• Roofs, gutters, downpipes, drain lines
• Pipe frost protection
• Tank frost protection
• Sprinkler systems
DEVIreg™ 610 is an electronic thermostat suitable for many different indoor and outdoor applications. It is water resistant and can be mounted on any plain surface e.g. directly on the pipe.
Applications:
• Pipe frost protection
• Tank frost protection
• Sprinkler systems
Warranty
At Danfoss, it is important for us to deliver high-quality products with long-lasting effects. Should you, against all expectations, experience a problem with your product, Danfoss offers a warranty for electric heating products valid from the date of purchase that was no later than 2 years from production date.
Depending on the product, the product guarantee is valid for two years, five years, or twenty years.
Product warranty covers costs for:
- product replacement with a new comparable product or repair of the product
- transportation costs
Documents
Related products
Accessories
Videos
Electric heating videos on YouTube
You can see all our videos about electric heating on a dedicated playlist on YouTube. Follow the link below.
Tools and apps
The Plugin supports your engineering and design journey by making your work faster due to simple functionalities in calculating all lengths, dimensions and product data of cables and mats. It covers all applications within Electric Heating projects: Electric floor heating, Ice & Snow melting systems, Pipe tracing, Cold stores, Sport fields, Vineyards etc.
By utilising Plugin, you will reduce design time for the project, provide all necessary information for installers in HTML/PDF format: BoM, resistance value check list, warranty list format. It means all project information can be consolidated in one file.
Plugin can be used with AutoCAD 2017-2023.
In order to clarify the project data for different applications use the technical request forms you find on this page
Case studies
Related applications
Related solutions
Are you looking for Electric Heating by Danfoss?
Click here and check out the product catalogue for Danfoss Electric Heating products.
