Analogue Thermostats

Analogue thermostats

Analogue thermostats are electronic control units which allow you to set the heating system type and adjust control parameters.

3 types of thermostats are available:

for air/room temperature control and limitation of floor temperatures—with room sensor and floor sensor
for air/room temperature control—with room sensor only
for floor temperature control—with floor sensor only.

DEVIreg™ 130/132

DEVIreg™ 130/132 is a line of simple electronic 16 Amp thermostats which can be installed directly on the wall. The thermostats have only one button for adjusting the temperature and for OFF mode. Furthermore, they have an LED indicator showing standby (green light) and heating (red light) periods.

DEVIreg™ 130/132

DEVIreg™ 330

DEVIreg™ 330 is a line of simple electronic thermostats for installation in electric cabinets with a DIN rail attachment.

The thermostat must be installed via an all-pole disconnection switch. It has an LED indicating standby (green light) and heating (red light) periods.

DEVIreg™ 330

DEVIreg™ 530/531/532

DEVIreg™ 530/531/532 is a line of simple electronic 15 Amp thermostats with a 2-pole switch and for flush-mounted fixing. The thermostats are used to control indoor floor heating systems.

DEVIreg™ 530/531/532

DEVIreg™ Hotwater

DEVIreg™ Hotwater is an electronic programmable controller with 4 channels for DIN rail mounting. Every channel can be set individually to maintain hot water with the option to disinfect manually or on a schedule. 2 sensors have to be used to measure the temperature for each channel.

Building Management System (BMS) control is possible through the Modbus RS485 serial interface.

DEVIreg™ Hotwater

Features and benefits of using analogue thermostats

Precise control of temperature

Automatic control of electric heating system

Economic control of electric heating system

Possibility of in-wall, on-wall, or DIN rail installation

Easy temperature setpoint selection

Warranty

At Danfoss, it is important for us to deliver high-quality products with long-lasting effects. Should you, against all expectations, experience a problem with your product, Danfoss offers a warranty for electric heating products valid from the date of purchase that was no later than 2 years from production date.

Depending on the product, the product guarantee is valid for two years, five years, or twenty years.

Product warranty covers costs for:

product replacement with a new comparable product or repair of the product
transportation costs

Warranty terms

Documents

Documents
Type	Name	Language	Valid for	Updated	Download	File type
Application guide	DEVI Indoor Application manual	English	Multiple	04 Nov, 2016	23.6 MB	.pdf
Application guide	DEVI Indoor Application manual	Russian	Kazakhstan	15 Sept, 2020	21.2 MB	.pdf
Application guide	DEVI Indoor Application manual	Danish	Denmark	03 Jun, 2021	4.8 MB	.pdf
Application guide	DEVI Indoor Application manual	Swedish	Sweden	22 Jun, 2022	20.8 MB	.pdf
Application guide	DEVI Indoor Application manual	Romanian, Moldavian, Moldovan	Romania	26 May, 2022	21.2 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	25 Jan, 2023	30.6 MB	.pdf
Catalog	DEVI Product Catalogue	Ukrainian	Ukraine	27 Nov, 2023	4.2 MB	.pdf
Catalog	DEVI Product Catalogue	English	Multiple	13 Jul, 2023	30.4 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	04 Jul, 2023	10.5 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	04 Mar, 2022	10.4 MB	.pdf
Catalog	DEVI Product Catalogue	Norwegian Bokmål	Norway	28 Jun, 2022	13.6 MB	.pdf
Catalog	DEVI Product Catalogue 2022	Latvian	Latvia	29 Mar, 2022	3.1 MB	.pdf
Data sheet	DEVIreg 130/132	German	Multiple	17 Mar, 2021	474.6 KB	.pdf
Data sheet	DEVIreg 330	German	Multiple	19 Mar, 2021	491.8 KB	.pdf
Data sheet	DEVIreg™ 130/132	Danish	Denmark	19 Oct, 2022	603.8 KB	.pdf
Data sheet	DEVIreg™ 130/132	English	Multiple	09 Jun, 2022	701.0 KB	.pdf
Data sheet	DEVIreg™ 330	Ukrainian	Ukraine	24 Dec, 2021	97.4 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Czech	Czech Republic	30 Oct, 2015	180.6 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Romanian, Moldavian, Moldovan	Romania	16 Feb, 2016	180.0 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Danish	Denmark	19 Oct, 2022	591.1 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	English	Multiple	17 Jul, 2023	743.9 KB	.pdf
Data sheet	DEVIreg™ 530	Romanian, Moldavian, Moldovan	Romania	16 Feb, 2016	257.9 KB	.pdf
Data sheet	DEVIreg™ 530	Czech	Czech Republic	30 Oct, 2015	258.1 KB	.pdf
Data sheet	DEVIreg™ 530, 531, 532	Ukrainian	Ukraine	24 Dec, 2021	78.0 KB	.pdf
Data sheet	DEVIreg™ Hotwater	Danish	Denmark	19 Oct, 2022	435.8 KB	.pdf
Data sheet	DEVIreg™ Hotwater	Czech	Czech Republic	20 May, 2022	193.0 KB	.pdf
Data sheet	DEVIreg™ Hotwater	Czech	Czech Republic	19 May, 2022	129.3 KB	.pdf
Data sheet	DEVIreg™ Hotwater	English	Multiple	09 Jun, 2022	406.4 KB	.pdf

Related products

if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Heating cables

Heating cables are used for a variety of applications, including indoor comfort floor heating and total heating both for small houses as well as large commercial buildings.
Heating cables are mostly used in connection with new building or larger renovation projects.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Heating Mats

Heating mats are used for the installation of a thin layer of tile adhesive, self-leveling mixture, or similar. The standard minimum thickness of the floor layer is 5-8 mm while the thickness of electric heating mat is 3–4.5 mm. This minimises the floor level increase. Electric heating mats consist of a thin cable securely fixed on self-adhesive glass-fibre mesh, usually of 50 cm width. Thin heating mats are manufactured as ready-made heating sections with a specific area (i.e. 0.5, 1, 1.5 … 12 m²) including a power supply cable (cold lead) and hermetically sealed connections.

Accessories

Relevant accessories

Find relevant accessories by following this link

Accessories in Product Store

Videos

Electric heating videos on YouTube

You can see all our videos about electric heating on a dedicated playlist on YouTube. Follow the link below.

Go to the electric heating playlist on YouTube

Tools and apps

EH technical request forms

In order to clarify the project data for different applications use the technical request forms you find on this page

EH technical request forms

EH Plugin for AutoCAD

The Plugin supports your engineering and design journey by making your work faster due to simple functionalities in calculating all lengths, dimensions and product data of cables and mats. It covers all applications within Electric Heating projects: Electric floor heating, Ice & Snow melting systems, Pipe tracing, Cold stores, Sport fields, Vineyards etc.
By utilizing Plugin, you will reduce design time for the project, provide all necessary information for installers in HTML/PDF format: BoM, resistance value check list, warranty list format. It means all project information can be consolidated in one file.

Plugin can be used with AutoCAD 2021.

Download EH Plugin for AutoCAD

Case studies

Coming soon...

Related applications

if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Cold rooms

Danfoss solutions for cold rooms help keep the food fresh and safe for consumption and therefore contribute to reducing food loss and waste.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Domestic hot water

Danfoss Domestic Hot Water systems provide everything for the production, storage, hydronic balancing, temperature control and temperature logging for drinking water in non-residential and multi-family house buildings. The systems established are high performing, provide comfort and hygiene and ensure maximum possible protection against legionella.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Electric floor heating

Electric underfloor heating for all types of floors

Electric heating is an energy-efficient and environmentally friendly floor heating solution. It is flexible for new build homes and renovations for both wet and dry installation.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Room temperature control

Radiator thermostats and room temperature controller systems compensate for fluctuating heating requirements, keeping the temperature in every room at the level individually set by the resident.

Related solutions

if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Commercial refrigeration

As a leading supplier within commercial refrigeration our extensive product range enables us to support solutions for anything from transport refrigeration to speciality cooling.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Cruise ships

Nothing is as personal as how individuals experience comfort. To achieve the expected level of cabin comfort for passengers on cruise ships, Danfoss offers heating, cooling, and control solutions which also improve energy efficiency.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Danfoss Smart Store ADC demonstrates the journey towards a net-zero supermarket

The need for supermarkets to improve energy efficiency, reduce food loss and minimize carbon footprint is higher than ever before. In cooperation with a Danish supermarket Danfoss has installed all the lasted technologies and solutions to achieve one of the most energy efficient supermarkets possible.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Hotels

The hotel industry is a highly competitive sector where margins are constantly under pressure. The service towards guests must remain on a high level to hold the hotels' reputation. Saving energy is a key-differentiator. Danfoss offers comfort increasing HVAC solutions which help reduce the energy consumption.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Multi-family buildings

Modern heating technology gives property owners and managers numerous ways to improve energy efficiency in their buildings. Whether planning a new build, renovation or refurbishment.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Offices

The ways office buildings are used is changing fast. Trends such as smart offices, digitalization and flexible work stations require adaptations in the technical aspects as well. Optimal indoor comfort for workers is essential. Danfoss offers comfort-increasing and energy-saving HVAC solutions.