Space comfort

  • Overview
  • Related products
  • Case studies

To achieve the best possible space comfort for users, every building is equipped with a suitable Heating and/or Cooling system. There are various options to increase or decrease the room temperatures and how this is controlled:

  • Terminal units
  • Radiator heating
  • Floor heating

Terminal units

Among others, cover fan coil units, cooling panels and climate ceilings. These are mostly installed in the ceiling and provide a room with heating and/or cooling via a 2-, 3- or 4-pipe system. To control the room temperature, the most accurate results, in both full- and partial load conditions, can be achieved by using Pressure-Independent Balancing and Control Valves (PIBCV). They are simply set to the required flow under full load conditions and function as automatic flow limiters. In partial load conditions, the actuator accurately reduces the flow according to needs. No overflow situation will occur, increasing the energy efficiency of the heat or cooling source.
The actuators can be controlled via a Building Management System (BMS) or stand-alone electronic room controllers. In case the terminal units contain a fan, the room controller can also be used to change the fan speed.

Radiator heating

In most cases, designed as a 2-pipe system with one or more radiators in every room. To control the room temperature, Danfoss radiator thermostats are used. They consist of a thermostatic radiator valve, mostly with a pre-setting of the design flow, and a temperature sensor. A wide variety of sensors ensure accurate control of the room temperature. For example, if curtains prevent proper measurement of room temperature, a version with remote sensor or remote sensor and control provide a better solution.
For optimal space comfort, it is recommended to equip the radiator system with an automatic hydronic balancing solution. This eliminates pressure fluctuations, thereby ensuring that the radiator thermostats function optimally.

Floor heating

Offers a high level of comfort by heating rooms from the floor up. The heat is spread evenly and, because it is situated in the floor, it doesn't take up any precious room space. Danfoss offers both water-based (hydronic) floor heating as well as electrical floor heating solutions. It can be used to heat all spaces in the building or to heat dedicated spaces, such as hotel bathrooms, where the comfort requirements are highest.
With both hydronic floor heating and electrical floor heating systems, room and/or floor temperature can be controlled via room thermostats. These ensure a superb level of space comfort while avoiding rooms being heated when this is not needed.


How we can help you

Accurate room temperature control

High user comfort experience

Complaint-free indoor comfort

Wide variety of systems and control solutions

Danfoss HVAC applications in commercial buildings

Danfoss helps you create better indoor environments with HVAC solutions based on application knowhow and a comprehensive portfolio of products for heating, ventilation and air conditioning in public and commercial buildings. 

How you can reach maximum space comfort?

Related products

  • if (isSmallPicture) { AB-QM- Danfoss } else if (isBigColumns) { AB-QM- Danfoss } else { AB-QM- Danfoss }

    AB-QM Pressure Independent Balancing and Control Valves (PIBCV) provide both a control functionality and dynamic balancing solution for HVAC heating and cooling systems. PIBCV are designed for various types of terminal units and provide high indoor comfort and energy efficiency in public and commercial buildings.

  • if (isSmallPicture) { Actuators for PIBCV- Danfoss } else if (isBigColumns) { Actuators for PIBCV- Danfoss } else { Actuators for PIBCV- Danfoss }
    Actuators for PIBCV

    To take advantage of the combined balancing and control features of Danfoss AB-QM it has to be equipped with actuators controlled by room thermostats or a Building Management System. Danfoss offers a broad range of actuators varying from Thermal on-off to Geared digital actuators with bus communication.

  • if (isSmallPicture) { Electric underfloor heating - thermostats } else if (isBigColumns) { Electric underfloor heating - thermostats } else { Electric underfloor heating - thermostats }
    Electric underfloor heating - thermostats

    ECtemp™ Smart thermostat is primarily used for controlling electrical floor heating elements. The discreet and timeless design of the square-shaped touchscreen makes the ECtemp™ Smart fit perfectly into any modern design interior. The intuitive mobile app control turns your smartphone into a remote control and enables you to easily operate your floor heating system.

  • if (isSmallPicture) { Electric underfloor heating - cables } else if (isBigColumns) { Electric underfloor heating - cables } else { Electric underfloor heating - cables }
    Electric underfloor heating - cables

    Danfoss heating cables are developed for a variety of applications, including indoor comfort floor heating. Our latest innovation, Danfoss ECflex is the direct result of combining many years of experience with true innovation to create a new level of versatility, flexibility and reliability.

  • if (isSmallPicture) { Electric underfloor heating - mats } else if (isBigColumns) { Electric underfloor heating - mats } else { Electric underfloor heating - mats }
    Electric underfloor heating - mats

    The heating mat can be applied directly to the surface of any old flooring and is installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level.

  • if (isSmallPicture) { Other electric heating: mirror foil } else if (isBigColumns) { Other electric heating: mirror foil } else { Other electric heating: mirror foil }
    Other electric heating: mirror foil

    Mirror heating foils from Danfoss is an effective system for keeping the mirror completely steam free. Fast and easy installation where the self-adhesive side of the heating foil is placed on the back of the mirror.

  • if (isSmallPicture) { Room controls- Danfoss } else if (isBigColumns) { Room controls- Danfoss } else { Room controls- Danfoss }
    Room controls

    To ensure hydronic (water based) underfloor heating or cooling systems achieve the expected high level of comfort and low energy consumption, good room temperature controls are essential. They control the room or floor temperature to avoid overheating. For optimal comfort each room has it's own room thermostat.

Case studies

  • if (isSmallPicture) { EDGE Amsterdam West - healthy & smart office } else if (isBigColumns) { EDGE Amsterdam West - healthy & smart office } else { EDGE Amsterdam West - healthy & smart office }
    HVAC Flexibility and Energy monitoring in multi-tenant healthy & smart office

    Building: Office
    Application: Hydronic balancing and remote control of 4-pipe heating/cooling change-over system.
    Challenge: Gaining BREEAM credits for energy monitoring and ensure fast, fail free installation.
    Solution: Digital NovoCon S actuator combined with AB-QM 4.0 PICVs and ChangeOver6 Energy. The combination balances the system hydronically, allow remote access via a BMS and provides actual energy consumption data per climate panel during both heating and cooling operation.

  • if (isSmallPicture) { } else if (isBigColumns) { } else { }
    Hydronic balancing in SAMBA bank head office, Riyadh, UAE

    At the heart of the new King Abdullah Financial District in Riyadh stands the impressive SAMBA head office. The 40-storey building represents a landmark in sustainable architecture and engineering and forms an attractive work space for the 800 people working in the SAMBA Financial Group head office.

  • if (isSmallPicture) { } else if (isBigColumns) { } else { }
    Dynamic valve for bigger comfort and energy efficiency in state school, Sonderborg, Denmark