(UK) Danfoss United Kingdom

>	My Product List

Categories

>	Refrigeration and A/C

>	VLT® Drives

>	Industrial Automation

>	High-Pressure Pumps

>	Print Page

- Available in battery and 230 volt versions
- Available with built in or remote sensing options
- 5/2 day programming
- 2 or 4 time and temerature changes per day
- Large easy to read display
- Multi-function fan controls
The HC6110-3 and HC6113-3 are designed for use in 4-pipe fan coil unit systems where changeover from heat to cool is based upon the temperature within the room that the thermostat is controlling.
The thermostats provide sequenced control of heating and cooling stages dependent upon the room temperature. Unlike most heat cool thermostats, which operate with a fixed dead-band between heating and cooling, the HC6000 products utilise a dual set point allowing the heating and cooling set points to be set completely independently of each other. An installer set minimum dead-band setting ensures that the heating and cooling setting cannot overlap.
These models combine the functionality of a timer and a thermostat into an easy to use 5/2 day unit that provides either two or four time and temperature events each day.
All products incorporate a fan output. This can be programmed to turn on and off with the demand for heat or cool, or can be set to run continuously. An enhanced fan mode allows the fan to run continuously during the day time periods but to turn on during unoccupied periods only where there is a demand. A manual 3-speed fan selector is built in to each product.
The range includes battery and mains powered units available with built-in or remote temperature sensors. All models incorporate an electronic lock to prevent unauthorised adjustment of programming. The same feature also allows the installer to limit the amount of override features available to the user.

6000 Series Heat/Cool Programmable Room Thermostats

>	Code number selector

>	Accessories (2)

>	Literature (8)

>

2 Item(s)

Accessories

TS2
- 087N6811
TS3
- 087N6784