N/A
Energy Savings Solutions
> Energy Services
> Products & Services
> Montage Software
> Danfoss Energy Management Institute (DEMI)
> Results & References
> Executive View
> Jobs & Career
> Contact
> About Us
> Case Stories
> Video Case
 
 
 
 
 
Danfoss Logo

Phases of EnSave®

EnSave® projects always start with an EnStudy® which is the basis for the actual EnSave® programme.

EnSave® is split into three phases as shown below. Status is done by the end of each phase.

Phase I: Verification & Planning

  • Plan project and motivate team
  • Design and develop energy management structure
  • Specify and visualise potentials
  • Pre-implement Montage
  • Specify technical projects
  • Verify preconditions for savings solutions

Phase II: Installation

  • Project management and follow-up
  • Implement and coach energy management system
  • Establish and coach energy behaviour
  • Implement Montage software
  • Implement technical projects

Phase III: Repayment

  • Project audit
  • Audit and measure energy management system
  • Audit energy  behaviour
  • Montage support
  • Evaluate technical projects