Refrigeration and Air Conditioning
> News
> Technical Literature
> Software
> Products
> Refrigerants & Energy Efficiency
> The Industries We Serve
> Electronic Refrigeration Controller - ERC
> New ETS 6: Taking Your HVAC System One Step Higher
> Telecom Cooling
> Mobile Refrigeration
> ICV
> Training and Education Materials
> About Us
> Contact
> Australian and New Zealand Wholesaling Outlets
 
 
 
 
 
Danfoss Logo
CO2 in Food Retail Applications

CO2 in Food Retail Applications

Danfoss Food Retail has developed solutions for CO2 based refrigeration systems which suits the needs both at the OEMs and the Contractors. The designs have allowed Danfoss to use standard off-the-shelve equipment ensuring that well proven equipment is installed in the plants. Today the most common plant type is Cascade Plants. Danfoss can also help customers with some solutions for trans-critical refrigeration installations.
CO2

Reduce Your Carbon Footprint - with the Danfoss CO2 Gas Cooler Solution

Individual Danfoss components as well as solutions were optimised based on what provides the best value for our customers:
  • Field proven products and solutions
  • Easy to install
  • Easy to adjust
  • Maximum system efficiency
  • Cost optimised systems and solutions
CO2 Food Retail Application Handbook

Food Retail Application Handbook

The handbook gives an overview of typical CO2 system designs for both sub- and transcritical applications. Additionally, it can be used as a reference guide to Danfoss components for CO2. The target group for this handbook is engineers, who are new to CO2 systems. Application guidelines contain general application descriptions, controls, functions and recommendations of Danfoss controllers.

Save Energy and Protect the Environment with our CO2 Solutions

Read our 16 page brochure promoting the Danfoss CO2 expertise in Food retail, Commercial and Industril Refrigeration including Application Guidelines, Case Stories and product lists.
CO2 Transcritical CO2 System in a Small Supermarket

Transcritical CO2 System in a Small Supermarket

A transcritical CO2 booster system, using only standard components, can be highly reliable and more efficient than a comparable R404a system and a R410a/CO2 cascade system. This has been proven by in field tests now summarised in the article.
CO2 Gas Detection

Gas Detection Application Guide

CO2 is a non-toxic and non-flammable gas. However high concentrations of CO2 in working areas could be dangerous for people. This guide presents an overview of the existing legislation in this field, as well as gives an overview of Danfoss program of gas detectors.
CO2 DirCalc

DIRcalc Calculation Software

DIRcalc gives the possibility to select a number of Danfoss products for subcritical CO2 applications. DIRcalc selects calculate pressure drops, velocities and other important parameters necessary to make a qualified choice of components. Components could be calculated separately as well as in valve trains. Additionally to Danfoss components DIRcalc can calculate standard pipes, bends and fittings, both steel and copper. The use of this software is free.
CO2 Phase Diagram

CO2 Phase Changes - Video

The video shows the properties of CO2 and illustrates as it behaves during phase changes. The video is excellent for educational purposes.

Danfoss - Your CO2 Solutions Provider

Danfoss - Your CO2 Solution Provider

CO2 has absolutely zero ozone depletion effect, and its global warming potential is negligible in the amounts used for industrial and commercial refrigeration.

Danfoss can provide a variety of products for cascade applications, as well as developing trans-critical solutions.