Caratteristiche e vantaggi
Gamma potenze
0.55 - 18.5 kW
(3 phase 380 - 480 V ± 10 %; 50/60 Hz)
0.37 - 1.5 kW
(Combined 1 and 3 phase 200 - 240 V ± 10 %; 50/60 Hz)
2.2 - 3.7 kW
(3 phase 200 - 240 V ± 10 %; 50/60 Hz)
Uscita di frequenza variabile tra 0 e 1000 Hz.
Sicurezza
Protezione al 100% contro i corto circuiti
Protezione al 100% in caso di guasto a terra
Protezione contro i transitori di rete
Commutazioni in ingresso
Commutazioni in uscita
Isolamento galvanico
Progettato secondo la normativa EN 50178
Speed compensation precise stop
Better process control
Same stopping distance independent of initial motor speed
Stop preciso
Interrupt controlled stop
Higher process repeatability
Well defined stopping
Contatore stop
Posizionamento accurato
L’ingresso ad impulsi è stato progettato per gestire segnali a 24 V push-pull provenienti da un encoder con risoluzione fino a 1024 ppr.
Encoder AB encoder come opzione.
Automatic motor tuning
Perfect match between motor and drive
Measures the stator resistance (RS) Better shaft performance
Measurements done without applying torque
Checks for missing motor phases
Senza declassamento fino a 45°C
Il VLT® 2800 funziona normalmente, senza declassamento, in ambienti con temperature fino a 45°.
Caratteristiche e vantaggi
Flessibilità di montaggio
Montaggio orizzontale
Montaggio verticale
Montaggio fianco a fianco
Senza declassamento
Also applies to modules
Temperature controlled fan
Tecnologia Cold Plate
Reduced heating in cabinet
Denser installation
Higher enclosure class cabinets
Protection against:
- Dust
- Dirt
- Humidity
Heat dissipates through the back of the drive
Comunicazione seriale
DeviceNet
ModBus RTU
Metasys N2
Profibus DP, come opzione
Sistemi Fieldbus
Profibus DP 3 o 12 Mbit/s Up to 127 nodes per installation
Homepage: www.profibus.com
DeviceNet fino a 500 kbit/s, Up to 64 nodes per installation
Homepage: www.odva.com
EMC filter and DC coils
Compliance with EMC Standards.
Built-in EN 55011 1A filter, 25 m screened cable.
No EMC disturbance.
EN 55011 1B filter available as module.
IT mains compatible version with RFI filter (up to 4 kW).
VLT 2880-2882 with RFI-switch.
Braking facilities
DC-braking - approx. 20% braking torque
AC-braking - approx. 20% braking torque
Dynamic braking
- Brake chopper built-in
- 160% braking torque
LCP2 Alpha numeric display, with copy function
MCT10 software