SGN sight glasses are used to indicate: the condition of the refrigerant in the plant liquid line, the moisture content in the refrigerant and the flo...
|
SGI sight glasses are used to indicate: the condition of the refrigerant in the plant liquid line, the moisture content in the refrigerant and the flo...
|
SGH R410A specific sight glasses are used to indicate: the condition of the refrigerant in the plant liquid line and the moisture content in the refri...
|
SG sight glasses are used to indicate: the condition of the refrigerant in the plant liquid line and the flow in the oil return line from the oil sepa...
|
Saddle for soldering onto refrigerant system tubing. The SGR/SGRN/SGRI/SGRH is screwed into the saddle. Available for most tubing sizes.
|
DCL filter driers are optimised for HCFC and CFC refrigerants and mineral or benzene oils. The filter driers are hermetic and approved for up to 46 ba...
|
DML filter driers are optimised for HFC refrigerants and mineral or benzene oils. The filter driers are hermetic and approved for 46 bar, depending on...
|
The DCR. driers are delivered with exchangeable cores for use in liquid and suction lines in refrigeration plants with fluorinated refrigerants. Core...
|
Bi-flow filter driers, type DCB, are for use in liquid lines on heat pumps.The filter driers have built-in check valves which ensures that refrigerant...
|
Bi-flow filter driers, type DMB, are for use in liquid lines on heat pumps.The filter driers have built-in check valves which ensure that refrigerant...
|
DAS burnout filter drier are used in the suction line to clean up refrigerant after compressor motor burnout to protect new compressors against premat...
|
DCC is a combined receiver and filter drier for use in small hermetic refrigeration systems with thermostatic expansion valve.Under operation conditio...
|
DMC is a combined receiver and filter drier for use in small hermetic refrigeration systems with thermostatic expansion valve.Under operation conditio...
|
With the flare / solder adaptor, flare connectors can be easily and reliably changed to solder connections.As the flare connection are fitted with a s...
| | |